How to remove and install the front bumper cover on 2003 Ford Escape?

Before installing or uninstalling a front bumper cover users must lift and stabilize their car. The six pin-type retainers must be taken out first while the rear bumper cover has its two side bolts removed. Start by untethering the two front bumper cover-to-front fender pin-type retainers which are present one unit each at the sides of the vehicle. Disconnection of electrical fog lamps connectors is mandatory for vehicles that have them installed. First detach both lower front bumper cover bolts and all pin-type retainers. To disengage the front bumper cover you need to remove its two upper bolts which are positioned one each on the sides. Proceed with installation by following the removal steps in reverse order while placing the front bumper cover properly into the bumper slides then transferring any required components.

OEM 2003 Ford Escape Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Bumpers found

View related parts
2003 Ford Escape Bumper Cover, Rear Part Number: YL8Z-17K835-EAA
$185.98 MSRP: $257.28
You Save: $71.30 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: YL8Z-17B807-HAA
- Base No.: 17K835
- Item Weight: 11.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-17K835-EAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Escape Reinforcement, Front Part Number: 9L8Z-17757-A
$93.79 MSRP: $115.47
You Save: $21.68 (19%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover Reinforcement Beam, Front; Bumper Cover Reinforcement, Front
- Position: Front
- Replaces: YL8Z-17757-AA, 5L8Z-17757-AA
- Base No.: 17757
- Item Weight: 8.30 Pounds
- Item Dimensions: 5.2 x 45.5 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-17757-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Escape Bumper Cover, Front Part Number: YL8Z-17D957-EAB
$178.41 MSRP: $242.78
You Save: $64.37 (27%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Replaces: YL8Z-17757-MAB, YL8Z-17757-JAB
- Base No.: 17D957
- Item Weight: 9.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-17D957-EAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- XLS, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Escape Bumper Cover, Rear Part Number: YL8Z-17K835-EAB
$163.56 MSRP: $222.58
You Save: $59.02 (27%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Replaces: YL8Z-17B807-HAB
- Base No.: 17K835
- Item Weight: 10.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-17K835-EAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Escape Bumper Cover, Rear Part Number: 2L8Z-17K835-FAPTM
$376.83 MSRP: $517.02
You Save: $140.19 (28%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Base No.: 17K835
- Item Weight: 12.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L8Z-17K835-FAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Escape Bumper Cover, Front Part Number: 2L8Z-17D957-AAPTM
$164.76 MSRP: $227.93
You Save: $63.17 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 12.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L8Z-17D957-AAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS

2003 Ford Escape Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Escape Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Escape Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Escape Bumper Parts Q&A

Q: How to remove and install the front bumper cover on 2003 Ford Escape?
A: Before installing or uninstalling a front bumper cover users must lift and stabilize their car. The six pin-type retainers must be taken out first while the rear bumper cover has its two side bolts removed. Start by untethering the two front bumper cover-to-front fender pin-type retainers which are present one unit each at the sides of the vehicle. Disconnection of electrical fog lamps connectors is mandatory for vehicles that have them installed. First detach both lower front bumper cover bolts and all pin-type retainers. To disengage the front bumper cover you need to remove its two upper bolts which are positioned one each on the sides. Proceed with installation by following the removal steps in reverse order while placing the front bumper cover properly into the bumper slides then transferring any required components.