How to Service and Repair the Lower Rear Motor and Transmission Mount for the 3.0L DOHC on 2003 Ford Escape?

Service and repair of the 3.0L DOHC lower rear transaxle support insulator demands breather tube and Mass Air Flow (MAF) sensor disconnection to be performed. Start by taking off the intake tube together with the air cleaner cover before handling the air cleaner assembly. You should begin by taking out the mount after removing its securing bolts and nuts. The installation process begins with new mount along with bolts but the bolt should remain loose until proper alignment is achieved. Then tighten the bolt. Reinstall the intake tube along with the air cleaner assembly and then finally place on the air cleaner cover. The last step involves reattaching the breather tube together with the Mass Air Flow (MAF) sensor.

OEM 2003 Ford Escape Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

21 Motor And Transmission Mounts found

View related parts
2003 Ford Escape Transmission Mount Part Number: YL8Z-6038-AA
$50.06 MSRP: $69.25
You Save: $19.19 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Manual Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Front Mount; Mount
- Base No.: 6038
- Item Weight: 3.10 Pounds
- Item Dimensions: 7.8 x 6.8 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-6038-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Escape Mount Part Number: 3L8Z-6038-EA
$67.99 MSRP: $94.05
You Save: $26.06 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Manual Transmission Mount; Engine Mount Bracket; Motor Mount; Transmission Mount
- Base No.: 6038
- Item Weight: 4.30 Pounds
- Item Dimensions: 8.1 x 6.7 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L8Z-6038-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 6 Cyl 3.0 L GAS
View related parts
2003 Ford Escape Side Mount Part Number: 4L8Z-6068-EA
$96.88 MSRP: $134.00
You Save: $37.12 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount; Engine Mount Bracket; Motor Mount; Rear Mount
- Replaces: 3L8Z-6068-EA, YL8Z-6068-AB
- Base No.: 6068B
- Item Weight: 3.50 Pounds
- Item Dimensions: 9.5 x 5.4 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L8Z-6068-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Escape Front Mount Part Number: YL8Z-6068-AA
$150.00 MSRP: $218.33
You Save: $68.33 (32%)
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount Support Bracket; Torque Strut; Motor Mount; Rear Mount; Front Insulator; Insulator
- Base No.: 6068A
- Item Weight: 6.30 Pounds
- Item Dimensions: 8.1 x 6.0 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-6068-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Escape Transmission Mount Part Number: YL8Z-6038-BA
$4.27 MSRP: $5.90
You Save: $1.63 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine; Manual Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Front Mount; Insulator Assembly - Engine Support
- Base No.: 6038
- Item Weight: 3.20 Pounds
- Item Dimensions: 7.8 x 6.7 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-6038-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS
View related parts
2003 Ford Escape Timing Cover, Front Lower Passenger Side Part Number: XS7Z-6030-AA
$45.49 MSRP: $65.08
You Save: $19.59 (31%)
ADD TO CART
Product Specifications
- Other Name: Support; Auto Trans Mount Bracket, Front Right; Manual Trans Mount Bracket, Front Right; Engine Mount Bracket; Support Bracket; Front Support; Front Bracket; Bracket
- Manufacturer Note: RH - Front
- Position: Front Lower Passenger Side
- Base No.: 6030
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.4 x 2.9 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XS7Z-6030-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS
View related parts
2003 Ford Escape Transmission Mount Bracket Part Number: YL8Z-6M007-AA
$19.34 MSRP: $26.76
You Save: $7.42 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket; Manual Transmission Mount Bracket; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Mount Support; Transmission Mount
- Base No.: 6028
- Item Weight: 2.80 Pounds
- Item Dimensions: 8.0 x 7.0 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-6M007-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Escape Engine Support Bracket Part Number: YL8Z-6L062-AA
$34.70 MSRP: $48.01
You Save: $13.31 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Support; Engine Mount Crossmember; Transmission Mount; Motor Mount; Bracket
- Base No.: 6L062
- Item Weight: 3.10 Pounds
- Item Dimensions: 7.9 x 7.1 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-6L062-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Escape Insulator Part Number: YL8Z-6A061-BA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount Bracket; Manual Transmission Mount; Crossmember Insulator; Motor Mount
- Replaces: YL8Z-6A061-AA
- Base No.: 6A061A
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.0 x 6.9 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: YL8Z-6A061-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT, XLT No Boundaries | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Escape Front Support Part Number: YL8Z-6031-CA
Product Specifications
- Other Name: Bracket; Engine Mount Support Bracket; Motor Mount
- Base No.: 6030
- Item Weight: 2.00 Pounds
- Item Dimensions: 7.8 x 6.8 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-6031-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 6 Cyl 3.0 L GAS
View related parts
2003 Ford Escape Transmission Mount Part Number: YL8Z-6038-EA
Product Specifications
- Other Name: Insulator Assembly - Engine; Manual Transmission Mount; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Front Mount; Insulator Assembly - Engine Support
- Base No.: 6038
- Item Weight: 2.90 Pounds
- Item Dimensions: 8.0 x 6.7 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-6038-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS
View related parts
2003 Ford Escape Front Bracket, Upper Part Number: YL8Z-6061-AA
Product Specifications
- Other Name: Bracket - Engine Support; Engine Mount Bracket, Upper; Motor Mount; Engine Mount Bracket
- Position: Upper
- Base No.: 6061
- Item Weight: 2.60 Pounds
- Item Dimensions: 8.1 x 6.8 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-6061-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS
View related parts
2003 Ford Escape Upper Bracket Part Number: YL8Z-6061-BA
Product Specifications
- Other Name: Bracket - Engine Support; Engine Mount Bracket, Upper; Motor Mount; Engine Mount Bracket
- Position: Upper
- Base No.: 6061
- Item Weight: 2.00 Pounds
- Item Dimensions: 7.9 x 6.8 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-6061-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 6 Cyl 3.0 L GAS
View related parts
2003 Ford Escape Rear Mount Part Number: YL8Z-6068-BA
Product Specifications
- Other Name: Insulator Assembly - Engine; Engine Mount; Engine Mount Bracket; Motor Mount; Mount; Insulator Assembly - Engine Support
- Base No.: 6068B
- Item Weight: 0.50 Pounds
- Item Dimensions: 7.8 x 7.0 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS
View related parts
2003 Ford Escape Side Support Part Number: YL8Z-6A023-BA
Product Specifications
- Other Name: Support; Engine Mount Bracket; Motor Mount
- Base No.: 6A023
- Item Weight: 3.30 Pounds
- Item Dimensions: 7.8 x 6.9 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-6A023-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS
View related parts
2003 Ford Escape Side Support Part Number: YL8Z-6A023-CA
Product Specifications
- Other Name: Support; Engine Mount Bracket; Motor Mount
- Base No.: 6A023
- Item Weight: 1.60 Pounds
- Item Dimensions: 7.7 x 7.0 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-6A023-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS
View related parts
2003 Ford Escape Transmission Mount Bracket Part Number: YL8Z-6M007-BA
Product Specifications
- Other Name: Bracket; Manual Transmission Mount Bracket; Transfer Case Mount; Transmission Mount
- Base No.: 6028
- Item Weight: 1.50 Pounds
- Item Dimensions: 7.8 x 6.9 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-6M007-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- XLS, XLT | 4 Cyl 2.0 L GAS
View related parts
2003 Ford Escape Engine Support Lower Insulator Part Number: YL8Z-6A061-BB
$55.88 MSRP: $81.33
You Save: $25.45 (32%)
Product Specifications
- Other Name: Insulator; Engine Mount Crossmember Insulator (Lower & Upper); Support Bracket Insulator; Transmission Mount; Engine Support Upper Insulator; Engine Support Insulator
- Position: Lower
- Replaces: YL8Z-6A061-AB
- Base No.: 6A061C
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.0 x 6.9 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-6A061-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Escape Side Support Part Number: YL8Z-6A023-AA
Product Specifications
- Other Name: Support; Engine Mount Bracket; Motor Mount
- Base No.: 6A023
- Item Weight: 2.20 Pounds
- Item Dimensions: 8.1 x 6.7 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL8Z-6A023-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Escape Transmission Mount Bracket Part Number: 3L8Z-6M007-DA
Product Specifications
- Other Name: Bracket; Manual Transmission Mount Bracket; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Mount Support; Transmission Mount
- Base No.: 6028
- Item Weight: 2.80 Pounds
- Item Dimensions: 8.1 x 6.9 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L8Z-6M007-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Escape Submodels:
- Limited, XLS, XLT | 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS

| Page 1 of 2 |Next >

1-20 of 21 Results

2003 Ford Escape Motor And Transmission Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Escape Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Escape Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Escape Motor And Transmission Mount Parts Q&A

Q: How to Service and Repair the Lower Rear Motor and Transmission Mount for the 3.0L DOHC on 2003 Ford Escape?
A: Service and repair of the 3.0L DOHC lower rear transaxle support insulator demands breather tube and Mass Air Flow (MAF) sensor disconnection to be performed. Start by taking off the intake tube together with the air cleaner cover before handling the air cleaner assembly. You should begin by taking out the mount after removing its securing bolts and nuts. The installation process begins with new mount along with bolts but the bolt should remain loose until proper alignment is achieved. Then tighten the bolt. Reinstall the intake tube along with the air cleaner assembly and then finally place on the air cleaner cover. The last step involves reattaching the breather tube together with the Mass Air Flow (MAF) sensor.