Other Name: Bulb; Center High Mount Stop Light, Rear; Engine Compartment, Back Up, Turn Signal; Parking, Dome, Interior, Tail, Car; Backup Lamp Bulb; Dome Lamp Bulb; Parking Lamp Bulb; High Mount Bulb; Exterior Bulbs.
Position: Rear
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: D7TZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
Other Name: Bulb, Turn Signal & Parking, Tail, Backup, License Plate, Side Marker, Headlight; Backup Lamp Bulb; Signal, Parking, Stop, High Mount, Cornering, License, and Parking Light Bulbs.
Position: Lower Outer
Replaces: F8DZ-13466-AB, E8AZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: F5DZ-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
2003 Ford Excursion Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Excursion Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Excursion Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Ford Excursion Headlight Bulb Parts Questions & Experts Answers
Q: How to service the aerodynamic headlight bulb on 2003 Ford Excursion?
A: Service of aerodynamic headlamp bulbs starts with turning both the headlamp switch and ignition switch OFF. you should first disconnect the headlamp connector before handling the halogen bulb by its base since the glass envelope contains pressured gas that might shatter after coming into contact with surfaces due to scratches or drop hazards. Use a counterclockwise rotation of the bulb retainer for one-eighth turn to remove it before taking out the bulb. Bulbs with model numbers 9004 and 9007 possess comparable visual appearances yet cannot be substituted for each other when installing new bulbs. The new bulb can be inserted before rotating the bulb retainer clockwise one-eighth turn for proper fixture. Finally, reconnect the headlamp connector.