How to Service and Repair the Motor and Transmission Mount on a 4R100 Automatic Transmission on 2003 Ford Excursion?

The first step to servicing and repairing the transmission mount of 4R100 automatic transmission starts with hoisting the vehicle and removing all nuts. Install the suitable high-lift transmission jack before you start the process but take care not to lift the transmission back more than necessary to prevent damage to the TSS and OSS sensors. The first step is to remove the rear transmission mount through the procedure of elevating the transmission over the rear crossmember support before taking out all bolts and removing the mount. Reinstall the mounting components with the same safety precaution of avoiding excessive transmission height. After activation, position the transmission uphill before installing and fixing the rear transmission mount by tightening its bolts. Lower the transmission onto the rear crossmember support then reinstall the nuts before removing the high-lift transmission jack and finally remove the supports while lowering the vehicle.

OEM 2003 Ford Excursion Motor And Transmission Mount

Motor and Trans Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

21 Motor And Transmission Mounts found

View related parts
2003 Ford Excursion Motor Mount, Passenger Side
Part Number: 2C3Z-6038-AC
$144.37 MSRP: $199.72
You Save: $55.35 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount; Mount
- Manufacturer Note: RH, 4x4
- Position: Passenger Side
- Replaces: 2C3Z-6038-AB
- Base No.: 6038
- Item Weight: 6.60 Pounds
- Item Dimensions: 9.5 x 9.1 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C3Z-6038-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.4 L GAS
View related parts
2003 Ford Excursion Motor Mount, Driver Side
Part Number: 4C3Z-6038-B
$27.44 MSRP: $37.96
You Save: $10.52 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Mount Bracket; Front Mount; Mount
- Position: Driver Side
- Replaces: 4C3Z-6038-A
- Base No.: 6038
- Item Weight: 5.30 Pounds
- Item Dimensions: 7.4 x 5.8 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C3Z-6038-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 6.0 L DIESEL
View related parts
2003 Ford Excursion Mount Bracket, Driver Side
Part Number: F81Z-6031-AA
$71.19 MSRP: $98.49
You Save: $27.30 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mounting; Engine Mount Bracket, Left; Motor Mount; Engine Mount Bracket
- Position: Driver Side
- Base No.: 6031
- Item Weight: 6.00 Pounds
- Item Dimensions: 9.1 x 8.5 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6031-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 7.3 L DIESEL
View related parts
2003 Ford Excursion Motor Mount, Driver Side
Part Number: 2C3Z-6038-AD
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount; Mount
- Position: Driver Side
- Replaces: 2C3Z-6038-AA
- Base No.: 6038
- Item Weight: 6.70 Pounds
- Item Dimensions: 9.6 x 5.2 x 11.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C3Z-6038-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.4 L GAS
View related parts
2003 Ford Excursion Motor Mount, Passenger Side
Part Number: 2C3Z-6038-BC
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount; Mount
- Manufacturer Note: RH, 4x4
- Position: Passenger Side
- Replaces: 2C3Z-6038-BB
- Base No.: 6038
- Item Weight: 11.10 Pounds
- Item Dimensions: 9.3 x 8.9 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C3Z-6038-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS
View related parts
2003 Ford Excursion Transmission Mount, Driver Side
Part Number: 4C3Z-6068-BA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Manual/Auto Transmission Mount; Engine/Transfer Case/Motor Mount; Rear Mount; Rear Support
- Manufacturer Note: 4x4
- Position: Driver Side
- Replaces: 3C3Z-6068-BA
- Base No.: 6068
- Item Weight: 3.90 Pounds
- Item Dimensions: 8.2 x 4.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C3Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 6.0 L DIESEL
View related parts
2003 Ford Excursion Motor Mount, Driver Side
Part Number: 2C3Z-6038-BD
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount; Mount
- Manufacturer Note: LH, 4x4
- Position: Driver Side
- Replaces: 2C3Z-6038-BA
- Base No.: 6038
- Item Weight: 7.00 Pounds
- Item Dimensions: 9.4 x 9.1 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C3Z-6038-BD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS
View related parts
2003 Ford Excursion Motor Mount, Driver Side
Part Number: 2C7Z-6038-AD
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left; Engine Mount Bracket; Front Mount
- Manufacturer Note: LH, 4x2
- Position: Driver Side
- Replaces: 2C7Z-6038-AA
- Base No.: 6038
- Item Weight: 7.10 Pounds
- Item Dimensions: 9.3 x 7.2 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C7Z-6038-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS
View related parts
2003 Ford Excursion Motor Mount, Front Passenger Side
Part Number: 3C3Z-6038-AB
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount; Mount
- Manufacturer Note: Front RH
- Position: Front Passenger Side
- Base No.: 6038
- Item Weight: 6.60 Pounds
- Item Dimensions: 7.8 x 4.6 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3C3Z-6038-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 6.0 L DIESEL
View related parts
2003 Ford Excursion Motor Mount
Part Number: F81Z-6038-CA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Engine Mount, Left, Right; Engine Mount Bracket; Front Mount
- Base No.: 6038
- Item Weight: 7.50 Pounds
- Item Dimensions: 7.9 x 6.0 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6038-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
2003 Ford Excursion Motor Mount, Passenger Side
Part Number: F81Z-6038-CB
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount
- Position: Passenger Side
- Base No.: 6038
- Item Weight: 7.60 Pounds
- Item Dimensions: 9.1 x 8.0 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6038-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 7.3 L DIESEL
View related parts
2003 Ford Excursion Transmission Mount
Part Number: F81Z-6068-AA
Product Specifications
- Other Name: Insulator Assembly - Engine Support; Automatic Transmission Mount; Engine Mount Bracket; Transfer Case Mount.; Rear Mount; Rear Support
- Base No.: 6068
- Item Weight: 6.10 Pounds
- Item Dimensions: 9.5 x 6.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6068-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
2003 Ford Excursion Motor Mount, Passenger Side
Part Number: 2C7Z-6038-AC
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount
- Manufacturer Note: RH, 4x2
- Position: Passenger Side
- Base No.: 6038
- Item Weight: 6.50 Pounds
- Item Dimensions: 9.2 x 8.3 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C7Z-6038-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.4 L GAS
View related parts
2003 Ford Excursion Motor Mount, Passenger Side
Part Number: 2C7Z-6038-BB
Product Specifications
- Other Name: Insulator Assembly; Engine Mount, Right; Engine Mount Bracket; Front Mount
- Manufacturer Note: RH, 4x2
- Position: Passenger Side
- Replaces: 2C7Z-6038-BA
- Base No.: 6038
- Item Weight: 7.70 Pounds
- Item Dimensions: 9.3 x 8.3 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C7Z-6038-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS
View related parts
2003 Ford Excursion Mount Bracket, Passenger Side
Part Number: 3C3Z-6030-AA
Product Specifications
- Other Name: Bracket; Engine Mount Bracket, Right; Motor Mount; Engine Mount Bracket
- Manufacturer Note: RH , Front
- Position: Passenger Side
- Base No.: 6030
- Item Weight: 4.50 Pounds
- Item Dimensions: 9.5 x 8.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3C3Z-6030-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 6.0 L DIESEL
View related parts
2003 Ford Excursion Trans Crossmember
Part Number: 4C7Z-6A023-AA
Product Specifications
- Other Name: Bracket; Transmission Crossmember
- Manufacturer Note: FROM 09/08/03
- Base No.: 6A023
- Item Weight: 7.10 Pounds
- Item Dimensions: 9.3 x 8.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C7Z-6A023-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
2003 Ford Excursion Mount Bracket, Passenger Side
Part Number: F81Z-6030-BA
Product Specifications
- Other Name: Bracket; Engine Mount Bracket, Right; Motor Mount; Engine Mount Bracket
- Position: Passenger Side
- Base No.: 6030
- Item Weight: 6.30 Pounds
- Item Dimensions: 9.1 x 8.3 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6030-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 7.3 L DIESEL
View related parts
2003 Ford Excursion Rear Mount
Part Number: YC3Z-6068-BA
Product Specifications
- Other Name: Insulator Assembly - Engine; Automatic Transmission Mount; Engine Mount Bracket; Motor Mount; Rear Support; Insulator Assembly - Engine Support
- Manufacturer Note: 4x4
- Base No.: 6068
- Item Weight: 4.60 Pounds
- Item Dimensions: 9.3 x 8.4 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YC3Z-6068-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 7.3 L DIESEL
View related parts
2003 Ford Excursion Trans Crossmember
Part Number: 3C7Z-6A023-AA
Product Specifications
- Other Name: Bracket; Transmission Crossmember
- Base No.: 6A023
- Item Dimensions: 9.5 x 8.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3C7Z-6A023-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 6.0 L DIESEL
View related parts
2003 Ford Excursion Mount Bracket, Passenger Side
Part Number: F81Z-6030-CA
Product Specifications
- Other Name: Bracket; Engine Mount Bracket; Motor Mount
- Position: Passenger Side
- Base No.: 6030
- Item Weight: 4.20 Pounds
- Item Dimensions: 9.4 x 8.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-6030-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.4 L GAS

| Page 1 of 2 |Next >

1-20 of 21 Results

2003 Ford Excursion Motor And Transmission Mount

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Excursion Motor And Transmission Mount available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Excursion Motor And Transmission Mount as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Excursion Motor And Transmission Mount Parts Questions & Experts Answers

Q: How to Service and Repair the Motor and Transmission Mount on a 4R100 Automatic Transmission on 2003 Ford Excursion?
A: The first step to servicing and repairing the transmission mount of 4R100 automatic transmission starts with hoisting the vehicle and removing all nuts. Install the suitable high-lift transmission jack before you start the process but take care not to lift the transmission back more than necessary to prevent damage to the TSS and OSS sensors. The first step is to remove the rear transmission mount through the procedure of elevating the transmission over the rear crossmember support before taking out all bolts and removing the mount. Reinstall the mounting components with the same safety precaution of avoiding excessive transmission height. After activation, position the transmission uphill before installing and fixing the rear transmission mount by tightening its bolts. Lower the transmission onto the rear crossmember support then reinstall the nuts before removing the high-lift transmission jack and finally remove the supports while lowering the vehicle.