How to program keyless entry remote transmitters on 2003 Ford Expedition?

In order to program the keyless entry remotes, you must turn the ignition key off to RUN eight times with the last being RUN. Press any button on either of the remotes within 20 seconds to verify programming. Else try again or investigate. Shut down in exit program by switching off the ignition, or wait twenty seconds with a final lock/unlock acknowledgement.

OEM 2003 Ford Expedition Transmitter

Car Key

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Transmitter found

View related parts
2003 Ford Expedition Remote Control Part Number: 8S4Z-15K601-A
$65.53 MSRP: $75.00
You Save: $9.47 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Remote Control System; Keyless Entry Transmitter; Transmitter; Transceiver
- Manufacturer Note: 4 Buttons
- Replaces: 2S4Z-15K601-AB
- Base No.: 15K601
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.3 x 4.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-15K601-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, XL, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2003 Ford Expedition Transmitter

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Expedition Transmitter available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Expedition Transmitter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Expedition Transmitter Parts Q&A

Q: How to program keyless entry remote transmitters on 2003 Ford Expedition?
A: In order to program the keyless entry remotes, you must turn the ignition key off to RUN eight times with the last being RUN. Press any button on either of the remotes within 20 seconds to verify programming. Else try again or investigate. Shut down in exit program by switching off the ignition, or wait twenty seconds with a final lock/unlock acknowledgement.