OEM 2003 Ford Explorer Sport Ignition Lock Cylinder

2003 Ford Explorer Sport Ignition Lock Cylinder Parts Questions & Experts Answers

• Q: How to Service and Repair an Ignition Lock Cylinder on 2003 Ford Explorer Sport?

  A: You should begin the service of the ignition switch lock cylinder by positioning the wheels straight ahead before disconnecting the battery ground cable for at least one minute. Service the assembly following all warnings and instructions regarding the steering wheel assembly. Turn off the cap from the ignition switch cylinder as the next step. The lock cylinder is repaired through the replacement of defective lock cylinders by using the lock repair package (F85Z-11582-AA). This package consists of step-by-step instructions for building a new lock cylinder that matches the current key code of the vehicle. Drilling on both the lock cylinder retaining pin with a 1/8-inch diameter and the middle of the ignition lock key slot with a 3/8-inch drill bit breaks the lock cylinder loose from its position. The old lock cylinder should be disposed while clearing all drill bits and shavings from the column. Secure all drill shavings from the steering column by cleaning it and then check for damage before removing the bearing retainer and bearing and gear. The installation process for the new ignition switch lock cylinder includes performing the opposite steps from removal while conducting a check for correct function.