Other Name: Switch Assembly - Front Door; Door Lock Switch, Front, Front Left, Front Right, Rear, Rear Left, Rear Right; Switch Assembly - Front Door - Central; Door Lock Switch
Position: Driver Side
Base No.: 14028
Item Weight: 0.30 Pounds
Item Dimensions: 6.2 x 4.2 x 4.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: YF1Z-14028-BA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2003 Ford Explorer Sport Trac Submodels:
Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
Other Name: Switch Assembly - Front Door - Center; Door Lock Switch, Front Left, Rear Left; Switch Assembly - Front Door - Central; Door Lock Switch
Position: Front Center Driver Side
Base No.: 14028
Item Weight: 0.20 Pounds
Item Dimensions: 6.4 x 4.2 x 4.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 1L2Z-14028-AB
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2003 Ford Explorer Sport Trac Submodels:
Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
2003 Ford Explorer Sport Trac Door Jamb Switch
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Explorer Sport Trac Door Jamb Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Explorer Sport Trac Door Jamb Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Ford Explorer Sport Trac Door Jamb Switch Parts Q&A
Q: How to Service the Door Jamb Switch on 2003 Ford Explorer Sport Trac?
A: Service of the door ajar switch starts by removing the interior trim panel from the door but the procedure is the same for the rear door. First disconnect the ground wire and remove the screw that fastens the switch before taking away the watershield. Detach the electrical connector from the door ajar switch and it is ready for removal. You should follow the opposite steps taken during removal to install the components correctly.