Other Name: Switch Assembly - Front Door; Door Lock Switch, Front, Front Left, Front Right, Rear, Rear Left, Rear Right; Switch Assembly - Front Door - Central; Door Lock Switch
Position: Driver Side
Base No.: 14028
Item Weight: 0.30 Pounds
Item Dimensions: 6.2 x 4.2 x 4.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: YF1Z-14028-BA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2002 Ford Explorer Sport Trac Submodels:
Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
Other Name: Switch Assembly - Front Door - Center; Door Lock Switch, Front Left, Rear Left; Switch Assembly - Front Door - Central; Door Lock Switch
Position: Front Center Driver Side
Base No.: 14028
Item Weight: 0.20 Pounds
Item Dimensions: 6.4 x 4.2 x 4.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 1L2Z-14028-AB
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2002 Ford Explorer Sport Trac Submodels:
Adrenalin, Base, XL, XLS, XLT | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
2002 Ford Explorer Sport Trac Door Jamb Switch
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Explorer Sport Trac Door Jamb Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Explorer Sport Trac Door Jamb Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Ford Explorer Sport Trac Door Jamb Switch Parts Questions & Experts Answers
Q: How to Service the Door Jamb Switch on 2002 Ford Explorer Sport Trac?
A: Service of the door ajar switch starts by taking out the interior door trim panel while the technique works similarly for front and rear doors. Begin by setting the watershield to the side and then unplug the ground wire before removing the screw that attaches the door ajar switch. The electrical connector needs to be disconnected as the final step to remove the switch. The installation steps will be the opposite of what was done during removal.