How to program the keyless entry remote transmitters on 2003 Ford Explorer?

In order to program keyless entry remotes, make sure that the anti-theft system is disabled. Press the unlock button and press the key eight times and then press any remote button. Program everything in 20 seconds. Door locks responding after programming is a confirmation that the programming mode is in the exit programming.

OEM 2003 Ford Explorer Transmitter

Car Key

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Transmitter found

View related parts
2003 Ford Explorer Remote Control Part Number: 8S4Z-15K601-A
$65.53 MSRP: $75.00
You Save: $9.47 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Remote Control System; Keyless Entry Transmitter; Transmitter; Transceiver
- Manufacturer Note: 4 Buttons
- Replaces: 2S4Z-15K601-AB
- Base No.: 15K601
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.3 x 4.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-15K601-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2003 Ford Explorer Transmitter

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Explorer Transmitter available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Explorer Transmitter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Explorer Transmitter Parts Q&A

Q: How to program the keyless entry remote transmitters on 2003 Ford Explorer?
A: In order to program keyless entry remotes, make sure that the anti-theft system is disabled. Press the unlock button and press the key eight times and then press any remote button. Program everything in 20 seconds. Door locks responding after programming is a confirmation that the programming mode is in the exit programming.