OEM 2004 Ford Explorer Transmitter

2004 Ford Explorer Transmitter Parts Q&A

• Q: How to program or reprogram all remote transmitters simultaneously on 2004 Ford Explorer?

  A: A synchronized execution of programming or reprogramming tasks is necessary for all remote transmitters. The procedure starts with electronic unlocking of your vehicle by using the remote transmitter along with the keyless entry keypad if present and door lock control switch while the driver door remains ajar. Start by rotating the key from OFF position to RUN eight times in less than ten seconds; the eighth move should end on the RUN setting and successful access will cause door locks to engage before unlocking. Pressing any button on a remote transmitter during the period of 20 seconds will trigger the doors to perform locking and subsequent unlocking operations for confirmation of correct programming. The procedure should be applied to each individual remote transmitter. When the door locks do not respond to the button you should wait for a few seconds before pressing it again. Testing for inspection and verification should be performed when there is no response from the door locks to verify that the programmer has not exceeded the maximum allowed number of remote transmitters. The key moving to OFF position marks the program exit as well as hitting the 20-second timer from program entry or programming the maximum remote transmitters.