FordParts
My Garage
My Account
Cart
OEM 2003 Ford F-150 Blower Motor
A/C Heater Blower Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Blower Motors found
2003 Ford F-150 Blower Motor, Front Part Number: XL7Z-19805-EA
$94.78 MSRP: $159.13You Save: $64.35 (41%)Product Specifications- Other Name: Motor - Cooling Blower; HVAC Blower Motor, Front; Blower Assembly; HVAC Blower Motor
- Manufacturer Note: Main unit: kit includes motor, retainer, & seal
- Position: Front
- Replaces: F85Z-19805-CA
- Base No.: 19805
- Item Weight: 4.30 Pounds
- Item Dimensions: 5.9 x 7.4 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL7Z-19805-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford F-150 Housing Assembly Part Number: YL3Z-18456-CA
Product Specifications- Other Name: Blower Assembly; HVAC Unit Case; A/C System Seal Kit; Case Assembly; Seal
- Manufacturer Note: Heater housing blower asy, Less A/C
- Base No.: 18456
- Item Weight: 15.30 Pounds
- Item Dimensions: 18.0 x 20.4 x 41.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL3Z-18456-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford F-150 Blower Motor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford F-150 Blower Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford F-150 Blower Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Ford F-150 Blower Motor Parts Q&A
- Q: How to Address Issues with the Blower Motor on a 2003 Ford F-150?A: The blower motor service and repair process starts with taking out the insulator situated on the right-hand lower instrument panel. Drivers should first remove the air filter that comes with dealer installation together with its mounting brackets when present. Start by uninstalling both the passenger-side scuff plate together with the kick panel while properly placing the weather strip away. After disconnecting the electrical connector you should reposition the carpet. Electronic Automatic Temperature Control vehicles require the aspirator tube disconnection and screw removal before the aspirator tube extension can be eliminated through screw extraction. The electrical connector must be removed before all vehicles proceed to remove screws which hold the blower motor in place and extract the blower motor from its location. The installation concludes by first removing the blower wheel followed by the dip detachment. The installation process ends by following the procedure which removed the parts.