FordParts
My Garage
My Account
Cart
OEM 2003 Ford Focus Brake Pads
Disc Brake Pad Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Brake Pads found
2003 Ford Focus Brake Pads, Front Part Number: YS4Z-2001-AA
$41.33 MSRP: $56.24You Save: $14.91 (27%)Product Specifications- Other Name: Kit - Caliper Brake Pad; Disc Brake Pad Set, Front; Disc Brake Pad Kit; Front Pads; Disc Brake Pad Set
- Manufacturer Note: Less SVT
- Position: Front
- Replaced by: YU2Z-2V001-KA
- Base No.: 2001
- Item Weight: 4.30 Pounds
- Item Dimensions: 8.1 x 4.5 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-2001-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Focus Brake Pads Part Number: 1S4Z-2200-BA
Product Specifications- Other Name: Kit - Caliper Brake; Disc Brake Pad Kit; Disc Brake Pad Set; Rear Pads; Kit - Caliper Brake Pad
- Base No.: 2200
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.7 x 4.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S4Z-2200-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Focus Brake Pads, Front Part Number: 2M5Z-2001-AB
Product Specifications- Other Name: Kit - Caliper Brake; Disc Brake Pad Set, Front; Disc Brake Pad Kit; Front Pads; Kit - Caliper Brake Pad; Disc Brake Pad Set
- Position: Front
- Base No.: 2001
- Item Weight: 4.70 Pounds
- Item Dimensions: 4.9 x 10.5 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2M5Z-2001-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Focus Brake Pads
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Focus Brake Pads available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Focus Brake Pads as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Ford Focus Brake Pads Parts Q&A
- Q: How to service and repair the front brake pads on 2003 Ford Focus?A: Start the front brake pad servo by first loosening wheel nuts so you can raise the vehicle and then support it while removing the wheel. The brake hose detachment from the support bracket should be followed by removing the outer brake pad retaining clip. The release of the piston occurs when you pull the caliper outward while the caliper detachment requires you to remove the bolt covers and bolts. Remove the outer brake pad first before the inner brake pad by lifting the retaining clip over the spring retaining lugs after suspending the caliper to avoid loads on the brake hose. The brake disc faces require cleaning before installation of the inner brake pad which must be installed before the outer brake pad. Install the caliper by fastening the bolts while you replace the bolt covers after pushing the outer retaining clip onto the spring retaining lugs. The brake hose needs reconnection to the support bracket while you need to locate the outer pad retaining clip before reinstalling wheels and checking fluid in the brake fluid reservoir.