How to service the front fender on 2003 Ford Mustang?

The antenna base of the right-hand fender demands service which requires removing the antenna base cap followed by unscrewing the screws until disconnecting the antenna cable. Start by removing the front bumper cover then move onto the screw before extracting both pin-type retainers and finally taking off the front rocker panel molding. Open the fender splash shield by taking out its screw and setting it off to the side. Remove the lower fender bolts and their equipped shims before gaining access to inner fender bolts by using the door opening. Detach the fender by taking out first the radiator grille opening panel to fender bolts and after that the upper bolts. The antenna needs to pass through the fender opening of the right-hand side before performing the installation steps in reverse order. Examining fender alignment must come before performing any final adjustments.

OEM 2003 Ford Mustang Fender

Wheel Fender

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fenders found

View related parts
2003 Ford Mustang Fender, Front Driver Side Part Number: XR3Z-16006-AA
Product Specifications
- Other Name: Fender Assembly - Front; Fender, Front Left
- Position: Front Driver Side
- Base No.: 16005
- Item Weight: 14.60 Pounds
- Item Dimensions: 65.7 x 31.4 x 12.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XR3Z-16006-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Mustang Submodels:
- Base, GT, GT Bullitt, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
View related parts
2003 Ford Mustang Fender, Front Passenger Side Part Number: XR3Z-16005-AA
Product Specifications
- Other Name: Fender Assembly - Front; Fender, Front Right
- Position: Front Passenger Side
- Base No.: 16005
- Item Weight: 13.90 Pounds
- Item Dimensions: 66.4 x 30.7 x 12.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XR3Z-16005-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Mustang Submodels:
- Base, GT, GT Bullitt, Mach 1, SVT Cobra, SVT Cobra 10th Anniversary | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2003 Ford Mustang Fender

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Mustang Fender available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Mustang Fender as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Mustang Fender Parts Q&A

Q: How to service the front fender on 2003 Ford Mustang?
A: The antenna base of the right-hand fender demands service which requires removing the antenna base cap followed by unscrewing the screws until disconnecting the antenna cable. Start by removing the front bumper cover then move onto the screw before extracting both pin-type retainers and finally taking off the front rocker panel molding. Open the fender splash shield by taking out its screw and setting it off to the side. Remove the lower fender bolts and their equipped shims before gaining access to inner fender bolts by using the door opening. Detach the fender by taking out first the radiator grille opening panel to fender bolts and after that the upper bolts. The antenna needs to pass through the fender opening of the right-hand side before performing the installation steps in reverse order. Examining fender alignment must come before performing any final adjustments.