How to service the hood latch on 2003 Ford Ranger?

To service the hood latch, first mark its position before removing the bolts and set the latch aside. Remove the latch and detach the cable conduit end fitting from the housing and the cable end fitting from the release lever. Reinstall by reversing removal and adjust the latch accordingly.

OEM 2003 Ford Ranger Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Latch found

View related parts
2003 Ford Ranger Lock, Front Part Number: 6W6Z-16700-A
$35.36 MSRP: $50.58
You Save: $15.22 (31%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Latch Assembly - Hood; Deck Lid Latch, Rear; Hood Latch, Front; Trunk Latch; Door Lock; Latch; Hood Latch
- Manufacturer Note: Hood Latch
- Position: Front
- Replaces: 4R3Z-16700-AA, F87Z-16700-BA
- Base No.: 16700
- Item Weight: 1.40 Pounds
- Item Dimensions: 6.4 x 5.2 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W6Z-16700-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Ranger Submodels:
- Edge, FX4, Splash, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2003 Ford Ranger Hood Latch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Ranger Hood Latch available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Ranger Hood Latch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Ranger Hood Latch Parts Q&A

Q: How to service the hood latch on 2003 Ford Ranger?
A: To service the hood latch, first mark its position before removing the bolts and set the latch aside. Remove the latch and detach the cable conduit end fitting from the housing and the cable end fitting from the release lever. Reinstall by reversing removal and adjust the latch accordingly.