How to Service and Repair the Power Steering Cooler on 2003 Ford Ranger?

One must lift the vehicle before starting work on the power steering cooler. The procedure starts by removing the nuts while loosening the clamp which enables hose disconnection so the fluid drains into a proper receptacle. The next step requires disconnecting the hose by loosening the clamp. Afterwards, the cooler can be removed. Begin by following the opposite steps of removal while filling then purging and leak-testing the system afterward.

OEM 2003 Ford Ranger Power Steering Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Cooler found

View related parts
2003 Ford Ranger Power Steering Cooler
Part Number: 1L5Z-3D746-RA
Product Specifications
- Other Name: Coil - Cooling
- Base No.: 3D746
- Item Weight: 1.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-3D746-RA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Ranger Submodels:
- Edge, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2003 Ford Ranger Power Steering Cooler

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Ranger Power Steering Cooler available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Ranger Power Steering Cooler as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Ranger Power Steering Cooler Parts Questions & Experts Answers

Q: How to Service and Repair the Power Steering Cooler on 2003 Ford Ranger?
A: One must lift the vehicle before starting work on the power steering cooler. The procedure starts by removing the nuts while loosening the clamp which enables hose disconnection so the fluid drains into a proper receptacle. The next step requires disconnecting the hose by loosening the clamp. Afterwards, the cooler can be removed. Begin by following the opposite steps of removal while filling then purging and leak-testing the system afterward.