FordParts
My Garage
My Account
Cart
OEM 2003 Ford Thunderbird Thermostat Housing
Engine Coolant Thermostat Housing- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Thermostat Housings found
Product Specifications- Other Name: Connection Water Outlet; Engine Coolant Thermostat Housing, Upper; Thermostat Housing Cover; Thermostat Cover; Water Outlet; Connection - Water Outlet
- Position: Upper
- Base No.: 8592
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.7 x 7.8 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W4Z-8592-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Housing; Engine Coolant Thermostat Housing, Lower; Thermostat Housing Cover
- Manufacturer Note: Thermostat Housing
- Position: Lower
- Base No.: 8592B
- Item Weight: 2.10 Pounds
- Item Dimensions: 15.6 x 10.8 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-8592-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Connection - Water Outlet; Engine Coolant Thermostat Housing, Upper; Thermostat Housing Cover; Water Outlet; Thermostat Housing
- Manufacturer Note: CONNECTOR
- Position: Upper
- Base No.: 8592A
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.7 x 7.7 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-8592-BD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Ford Thunderbird Thermostat Housing
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Thunderbird Thermostat Housing available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Thunderbird Thermostat Housing as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Ford Thunderbird Thermostat Housing Parts Q&A
- Q: How to service and repair the thermostat housing on 2003 Ford Thunderbird?A: Service and repair operations on the thermostat housing begin with conducting a cooling system drain and removing both the engine appearance cover and air cleaner outlet tube. Remove the components according to the specified order shown in the provided illustrations. The installation procedure should be conducted in the opposite order and the cooling system must receive sufficient filling and bleeding before closing it. The thermostat will release from the housing by rotating it to any direction while a 18 mm open-end wrench pushes down and turns the retainer. When installing the thermostat spring point the small section towards the housing of the thermostat. To install the thermostat properly insert its pin into the housing hole and validate that the retainer tabs correctly engage with the thermostat housing. A 18 mm open-end wrench enables installation of the thermostat through directional rotation either way until the retainer locks down the thermostat inside the housing.