How to service and repair the brake master cylinder on 2003 Ford Windstar?

The first step for servicing the brake master cylinder includes disconnecting the battery ground cable. You should first remove the air cleaner assembly before disconnecting the speed control switch connector and fluid level sensor connector. After disconnecting the brake tubes you should remove the wiring bracket nut while placing the wiring bracket to the side. Correctly remove brake master cylinder nuts before extracting the brake master cylinder from its place. You should reverse the disassembly steps during installation while also performing brake system bleeding afterward.

OEM 2003 Ford Windstar Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2003 Ford Windstar Master Cylinder Part Number: XF2Z-2140-CB
$145.85 MSRP: $198.47
You Save: $52.62 (27%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly - Master; Brake Master Cylinder
- Manufacturer Note: Master cylinder, w/ anti-spin traction brakes - rear drum - with booster ID# XF22-2B195-CC/CD/CE
- Base No.: 2140
- Item Weight: 2.70 Pounds
- Item Dimensions: 7.4 x 5.8 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-2140-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2003 Ford Windstar Master Cylinder Part Number: XF2Z-2140-BB
$67.34 MSRP: $91.63
You Save: $24.29 (27%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly - Master; Brake Master Cylinder
- Manufacturer Note: Master cylinder, w/o anti-spin traction brakes - rear drum - with booster ID# XF22-2B195-BE and XF22-2B195-BC
- Base No.: 2140
- Item Weight: 2.60 Pounds
- Item Dimensions: 8.2 x 6.1 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-2140-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS

2003 Ford Windstar Brake Master Cylinder

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Windstar Brake Master Cylinder available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Windstar Brake Master Cylinder as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Windstar Brake Master Cylinder Parts Q&A

Q: How to service and repair the brake master cylinder on 2003 Ford Windstar?
A: The first step for servicing the brake master cylinder includes disconnecting the battery ground cable. You should first remove the air cleaner assembly before disconnecting the speed control switch connector and fluid level sensor connector. After disconnecting the brake tubes you should remove the wiring bracket nut while placing the wiring bracket to the side. Correctly remove brake master cylinder nuts before extracting the brake master cylinder from its place. You should reverse the disassembly steps during installation while also performing brake system bleeding afterward.