Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2003 Ford Windstar Parking Brake Cable

Emergency Parking Brake Release Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Parking Brake Cables found

  • 2003 Ford Windstar Parking Brake Cable - 1F2Z-2A635-AA
    View related parts

    2003 Ford Windstar Rear Cable Part Number: 1F2Z-2A635-AA

    $30.06 MSRP: $41.59
    You Save: $11.53 (28%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Cable Assembly - Parking Brake; Parking Brake Cable; Brake Cable
    • Manufacturer Note: Cable - rear - RH drum - 2002/
    • Replaces: YF2Z-2A635-AA
    • Item Weight: 1.80 Pounds
    • Item Dimensions: 11.9 x 8.7 x 19.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 1F2Z-2A635-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2003 Ford Windstar Submodels:
    • 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
  • 2003 Ford Windstar Parking Brake Cable - 1F2Z-2A635-AB
    View related parts

    2003 Ford Windstar Rear Cable Part Number: 1F2Z-2A635-AB

    $27.86 MSRP: $38.54
    You Save: $10.68 (28%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Cable Assembly - Parking Brake; Parking Brake Cable; Brake Cable
    • Manufacturer Note: Cable - rear - LH drum - 2002/
    • Replaces: YF2Z-2A635-AB
    • Base No.: 2A635
    • Item Weight: 1.40 Pounds
    • Item Dimensions: 11.9 x 8.5 x 19.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 1F2Z-2A635-AB
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2003 Ford Windstar Submodels:
    • 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
  • 2003 Ford Windstar Parking Brake Cable - F78Z-2853-AA
    View related parts

    2003 Ford Windstar Front Cable Part Number: F78Z-2853-AA

    Product Specifications
    • Other Name: Cable Assembly - Parking Brake; Parking Brake Cable; Brake Cable
    • Manufacturer Note: Cable (brake front)
    • Base No.: 2853
    • Item Weight: 0.80 Pounds
    • Item Dimensions: 11.9 x 8.5 x 19.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: F78Z-2853-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2003 Ford Windstar Submodels:
    • 3.0L, Base, GL, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS

2003 Ford Windstar Parking Brake Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Windstar Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Windstar Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Windstar Parking Brake Cable Parts Q&A

  • Q: How to service and repair the rear parking brake cable and conduit on 2003 Ford Windstar?
    A: Start by pulling down the bottom of the boot while it disconnects from the plastic retainer during service and repairs of the rear parking brake cable and conduit. The control handle requires an upward pull if the boot needs slipping out. Avoid damage to the boot retention tab since it fits into the control handle notch during boot removal. Inappropriate handling might necessitate boot replacement. A small screwdriver should be used to lift the retaining tab while you then slide the boot upward. Push down on the tension arm with the screwdriver until it reaches its complete depressed position before locking it down by means of a pin or screwdriver. Start by removing the cable anchor pin then raise supported the vehicle. First disconnect the rear parking brake cables from the equalizer yet keep in mind how spring tabs function as body-fasteners for the cable ends. First detach the brake drum then uninstall the rear cable and conduit both from the holder and body. Take off the parking brake cable from the parking brake lever while compressing the spring tabs for removal of the parking brake cable and conduit. Follow the opposite procedure of uninstallation to reassemble by checking that all retainers remain secured and all cables follow their proper routes.

Related 2003 Ford Windstar Parts

Alternate Year Models

+
2002 Ford Windstar Parking Brake Cable