How to service the Headlight Switch on 2003 Ford Windstar?

Startup service of the headlamp switch demands disconnecting the battery ground cable first. The first step involves unclipping the headlamp switch finish panel while disconnecting its electrical connectors. Users must unclip the headlamp switch after finishing service work. You should reverse the installation steps when completing reinstallation.

OEM 2003 Ford Windstar Headlight Switch

Headlamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Headlight Switch found

View related parts
2003 Ford Windstar Headlamp Switch
Part Number: XF2Z-11654-AA
$17.26 MSRP: $23.87
You Save: $6.61 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly; Multi Purpose Switch
- Manufacturer Note: #XF2T 11654-A*, switch for both auto lamps and conventional. The difference is in the bezel.
- Base No.: 11654
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.2 x 2.6 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-11654-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS

2003 Ford Windstar Headlight Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Windstar Headlight Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Windstar Headlight Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Windstar Headlight Switch Parts Questions & Experts Answers

Q: How to service the Headlight Switch on 2003 Ford Windstar?
A: Startup service of the headlamp switch demands disconnecting the battery ground cable first. The first step involves unclipping the headlamp switch finish panel while disconnecting its electrical connectors. Users must unclip the headlamp switch after finishing service work. You should reverse the installation steps when completing reinstallation.