FordParts
My Garage
My Account
Cart
OEM 2003 Lincoln LS Exhaust Valve
Exhaust Muffler Valve- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Exhaust Valves found
2003 Lincoln LS Exhaust Valve Part Number: XW4Z-6505-AA
Product Specifications- Other Name: Valve - Exhaust
- Base No.: 6505
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XW4Z-6505-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Lincoln LS Exhaust Valve Part Number: 1W4Z-6505-AA
Product Specifications- Other Name: Valve - Exhaust
- Base No.: 6505
- Item Weight: 0.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 12
- SKU: 1W4Z-6505-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Lincoln LS Exhaust Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Lincoln LS Exhaust Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Lincoln LS Exhaust Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Lincoln LS Exhaust Valve Parts Q&A
- Q: How to check and adjust exhaust valve and intake valve clearance on 2003 Lincoln LS?A: The inspection of valve clearance begins when the valve covers along with the spark plugs get removed from the engine. Measure all valve clearances while the camshaft reaches the base circle position by rotating the engine using the crankshaft pulley bolt. All valve clearances need to be measured before adjusting those which exceed the specifications. The first step for valve clearance adjustment requires timing chains removal followed by base circle measurement of all valves before camshaft extraction. Shims cannot be repaired while the camshafts stay in position. A feeler gauge should be used to measure valve clearances which should be recorded with their corresponding positions. After camshaft extraction one must note that shims display thickness markings (such as 2.22 mm indicated by 222 on labels). The adjusted shims need to provide an intake valve clearance range from 0.18 to 0.22 mm (0.00709 to 0.00866 inches). Additionally the outcome should be 0.33 to 0.38 mm (0.0128 to 0.0148 inches) for exhaust valve clearance at midrange the most ideal ranges are 0.20 mm (0.00787 inch) for intake and 0.35 mm (0.014 inch) for exhaust. To select shims use the following formula: required thickness equals current measurement and base thickness minus desired result. Also mark where to place the shims. The new camshaft installation process requires shims placement followed by camshaft mounting and machining between valve intervals followed by timing chain installation.