FordParts
My Garage
My Account
Cart
OEM 2003 Lincoln Navigator Vapor Canister
Fuel Vapor Canister- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Vapor Canisters found
2003 Lincoln Navigator Vapor Canister Part Number: F65Z-9D653-AA
$85.64 MSRP: $140.91You Save: $55.27 (40%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Reservoir Assembly; Vapor Canister Purge Solenoid
- Base No.: 9D653
- Item Weight: 2.20 Pounds
- Item Dimensions: 10.1 x 4.5 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F65Z-9D653-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Lincoln Navigator Vapor Canister Part Number: 2L1Z-9D653-BA
Product Specifications- Other Name: Cannister - Fuel Vapour Storage; Cannister - Fuel Vapour Store
- Manufacturer Note: Complete Asy - Bracket, Canister And Hoses
- Base No.: 9D653
- Item Weight: 9.30 Pounds
- Item Dimensions: 23.6 x 21.7 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-9D653-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2003 Lincoln Navigator Vapor Canister
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Lincoln Navigator Vapor Canister available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Lincoln Navigator Vapor Canister as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2003 Lincoln Navigator Vapor Canister Parts Q&A
- Q: How to Service and Repair the Vapor Canister on 2003 Lincoln Navigator?A: Service and repair of the evaporative emission control canister requires disconnecting the battery ground cable to lower the risk of explosion or fire from fuel vapor. Following support of the vehicle use the tools to remove the spare tire. The service technician must break the connection between the remote vapor hose of the fuel filler pipe and all evaporative emissions (Evap) canister fuel vapor hoses before proceeding further. The service begins with loosening the Evap canister bracket assembly mounting bolts before you separate the Evap canister vent solenoid electrical connector and the Evap canister bracket assembly. Install the Evap canister bracket assembly onto a clean surface and follow with vapor connector sleeve removal until the vapor hose can be detached from the Evap canister vent solenoid before you can remove the Evap canisters. Apply Merpol(R) to all O-rings before following the opposite sequence of removal steps. A leak test of the system and the evaporative emissions repair verification drive cycle should be performed after setup to validate system functionality.