How to service and repair the 40 percent of the 60/40 bench second row rear seat cushion on 2003 Mercury Mountaineer?

The service and repair process for the 40 percent of the 60/40 bench second row rear seat cushion begins by removing the second row 40 percent seat and continuing with component disassembly according to sequence. Proceed with component disassembly starting from the designated sequence. The initial step requires disconnecting the seat backrest J-clip before removing all staples from the backrest support panel. The seat backrest trim cover and foam pad need to be inverted for access to screws at the latch cover which allows removal of the two screws and cover to disengage the material from its latch cover position. The next step requires removing the backrest pivot bolt while performing the same steps on both sides starting from the inboard and then the outboard section. Avoid tearing the strip from the seat cushion foam pad during margin release of seat upholstery from its hook and loop strip. To finish the task repeat the steps of disassembly in reverse order.

OEM 2003 Mercury Mountaineer Seat Cushion

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Seat Cushions found

View related parts
2003 Mercury Mountaineer Seat Cushion Pad, Front
Part Number: 3L2Z-78632A22-AA
$104.37 MSRP: $151.92
You Save: $47.55 (32%)
ADD TO CART
Product Specifications
- Other Name: Pad; Seat Cushion Pad, Front; Seat Cushion
- Position: Front
- Replaces: 1L2Z-78632A22-AA
- Base No.: <632A22
- Item Weight: 5.40 Pounds
- Item Dimensions: 43.3 x 25.0 x 21.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3L2Z-78632A22-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2003 Mercury Mountaineer Seat Cushion Pad, Rear Driver Side
Part Number: 3L2Z-7863841-BA
$22.79 MSRP: $31.52
You Save: $8.73 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Foam, Rear Left; Seat Cushion
- Position: Rear Driver Side
- Base No.: <63840C
- Item Weight: 2.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L2Z-7863841-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2003 Mercury Mountaineer Seat Cushion, Rear
Part Number: 3L9Z-7863840-BA
$22.76 MSRP: $31.49
You Save: $8.73 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad - Rear Seat Cushion
- Position: Rear
- Base No.: <63840B
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L9Z-7863840-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2003 Mercury Mountaineer Seat Back Pad, Front
Part Number: 3L2Z-7864810-BA
Product Specifications
- Other Name: Pad; Seat Back Cushion, Front
- Position: Front
- Replaces: 1L2Z-7864810-BA
- Base No.: <64810
- Item Weight: 7.80 Pounds
- Item Dimensions: 30.3 x 30.6 x 13.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 3L2Z-7864810-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2003 Mercury Mountaineer Seat Cushion, Rear
Part Number: 1L2Z-7863840-AA
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Foam, Rear
- Position: Rear
- Base No.: <63840
- Item Weight: 6.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-7863840-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2003 Mercury Mountaineer Seat Cushion Pad, Rear Passenger Side
Part Number: 3L2Z-7863840-BA
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion Foam, Rear Right; Seat Cushion
- Position: Rear Passenger Side
- Base No.: <63840A
- Item Weight: 2.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L2Z-7863840-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2003 Mercury Mountaineer Seat Cushion

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Mercury Mountaineer Seat Cushion available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Mercury Mountaineer Seat Cushion as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Mercury Mountaineer Seat Cushion Parts Questions & Experts Answers

Q: How to service and repair the 40 percent of the 60/40 bench second row rear seat cushion on 2003 Mercury Mountaineer?
A: The service and repair process for the 40 percent of the 60/40 bench second row rear seat cushion begins by removing the second row 40 percent seat and continuing with component disassembly according to sequence. Proceed with component disassembly starting from the designated sequence. The initial step requires disconnecting the seat backrest J-clip before removing all staples from the backrest support panel. The seat backrest trim cover and foam pad need to be inverted for access to screws at the latch cover which allows removal of the two screws and cover to disengage the material from its latch cover position. The next step requires removing the backrest pivot bolt while performing the same steps on both sides starting from the inboard and then the outboard section. Avoid tearing the strip from the seat cushion foam pad during margin release of seat upholstery from its hook and loop strip. To finish the task repeat the steps of disassembly in reverse order.