FordParts
My Garage
My Account
Cart
OEM 2004 Ford Expedition Crankshaft Position Sensor
Engine Crankshaft Position Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Crankshaft Position Sensor found
2004 Ford Expedition Crankshaft Position Sensor Part Number: 1W7Z-6C315-AB
$41.11 MSRP: $65.27You Save: $24.16 (38%)Ships in 1 Business DayProduct Specifications- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Position Sensor; Sensor - Crankshaft Position - Cps
- Manufacturer Note: Sensor asy. (Crankshaft position) #1W7E 6C315-AA
- Replaces: 1W7Z-6C315-AA
- Base No.: 6C315
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.1 x 6.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W7Z-6C315-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2004 Ford Expedition Crankshaft Position Sensor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Expedition Crankshaft Position Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Expedition Crankshaft Position Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2004 Ford Expedition Crankshaft Position Sensor Parts Q&A
- Q: How to Service the Crankshaft Position Sensor on 2004 Ford Expedition?A: The first step to service the crankshaft position (CKP) sensor requires you to disconnect the battery ground cable. The service starts by moving the accessory drive belt from the A/C compressor pulley before lifting and supporting the vehicle. You must disconnect the electrical connector of the A/C compressor field coil before disconnecting the CKP sensor electrical connector and detaching the wiring harness. Access to the CKP sensor becomes possible by sliding the compressor down one inch after the A/C compressor bolts receive only enough release to create this opening. Unbolt the sensor from its position while you remove the CKP sensor from the system. The reverse steps from removal must be followed for product installation.