How to service and repair the parking assist distance sensor on 2004 Ford Expedition?

A technician should first remove the rear bumper cover from all vehicles when working on the parking assist distance sensor service. You need to take out the parking aid ultrasonic sensor from both Navigator and early build Expedition by disconnecting electrical connectors from the sensor and releasing its locking tabs. First remove the electrical connector from the radar sensor by detaching it while also removing the fasteners and isolating the foam absorber within the bumper cover. Correct installation of the sonar sensor in late build Expedition requires the removal of four nuts followed by the foam absorber from the bumper cover and electrical connector removal and locking tab disengagement. The installation of components should be done by following the removal steps in reverse order while performing Park Aid Calibration and Self-Test Diagnostics.

OEM 2004 Ford Expedition Parking Assist Distance Sensor

Parking Assist Distance Sensor Guide

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Parking Assist Distance Sensors found

View related parts
2004 Ford Expedition Parking Sensor, Rear Part Number: 4F2Z-15K859-A
$20.86 MSRP: $29.58
You Save: $8.72 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Parking Aid System; Parking Aid Sensor, Inner, Outer, Rear; Parking Sensors; Reverse Sensor; Sensor
- Position: Rear
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F2Z-15K859-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2004 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2004 Ford Expedition Backup Sensor, Black Part Number: 2L1Z-15K859-AA
$46.13 MSRP: $69.08
You Save: $22.95 (34%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Parking Aid System; Parking Aid Sensor; Parking Sensors; Reverse Sensor; Sensor
- Base No.: 15K859
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.3 x 1.6 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L1Z-15K859-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2004 Ford Expedition Radar Sensor Part Number: 5L7Z-15K859-BA
Product Specifications
- Other Name: Sensor - Parking Aid System; Parking Aid Sensor; Parking Sensors; Backup Sensor; Sensor
- Manufacturer Note: Radar
- Replaces: 4L7Z-15K859-BA
- Base No.: 15K859B
- Item Weight: 1.70 Pounds
- Item Dimensions: 10.5 x 10.2 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L7Z-15K859-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2004 Ford Expedition Parking Assist Distance Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Expedition Parking Assist Distance Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Expedition Parking Assist Distance Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford Expedition Parking Assist Distance Sensor Parts Q&A

Q: How to service and repair the parking assist distance sensor on 2004 Ford Expedition?
A: A technician should first remove the rear bumper cover from all vehicles when working on the parking assist distance sensor service. You need to take out the parking aid ultrasonic sensor from both Navigator and early build Expedition by disconnecting electrical connectors from the sensor and releasing its locking tabs. First remove the electrical connector from the radar sensor by detaching it while also removing the fasteners and isolating the foam absorber within the bumper cover. Correct installation of the sonar sensor in late build Expedition requires the removal of four nuts followed by the foam absorber from the bumper cover and electrical connector removal and locking tab disengagement. The installation of components should be done by following the removal steps in reverse order while performing Park Aid Calibration and Self-Test Diagnostics.