How to service the HVAC Control Module for blower motor speed control on 2004 Ford F-250 Super Duty?

In order to service the motor speed control of the blower motor, detach the connector of the A/C cycling switch. Removing the bolt and parting the heater lines is required to fit into vehicles that have auxiliary A/C. Then, eliminate screws, reassemble the suction accumulator, disconnect the electrical connector and install the new component in reverse of the steps.

OEM 2004 Ford F-250 Super Duty HVAC Control Module

Heater Control Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 HVAC Control Module found

View related parts
2004 Ford F-250 Super Duty Temperature Control Part Number: F81Z-19980-AA
$61.94 MSRP: $98.36
You Save: $36.42 (38%)
Product Specifications
- Other Name: Control; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Dash Control Unit
- Base No.: 19980
- Item Weight: 6.20 Pounds
- Item Dimensions: 4.5 x 2.9 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-19980-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

2004 Ford F-250 Super Duty HVAC Control Module

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford F-250 Super Duty HVAC Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford F-250 Super Duty HVAC Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford F-250 Super Duty HVAC Control Module Parts Q&A

Q: How to service the HVAC Control Module for blower motor speed control on 2004 Ford F-250 Super Duty?
A: In order to service the motor speed control of the blower motor, detach the connector of the A/C cycling switch. Removing the bolt and parting the heater lines is required to fit into vehicles that have auxiliary A/C. Then, eliminate screws, reassemble the suction accumulator, disconnect the electrical connector and install the new component in reverse of the steps.