How to service the rear ABS sensor on 2004 Ford Ranger?

Service of the rear ABS sensor starts by raising the vehicle then supporting it. Eliminate all debris which surrounds the sensor in the rear anti-lock brake assembly prior to taking it out. You should disconnect the electrical connector followed by the bolt removal and finally remove the sensor. You must clean the mounting surface before checking the anti-lock brake sensor O-ring for damage. Lightly apply axle lubricant to it when no damage is found. Finish the assembly operation by executing the reverse steps of removal work.

OEM 2004 Ford Ranger ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 ABS Sensors found

View related parts
2004 Ford Ranger ABS Sensor, Front Part Number: XL2Z-2C204-AB
$96.71 MSRP: $162.36
You Save: $65.65 (41%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front, Front Left, Front Right; Front Speed Sensor; ABS Wheel Speed Sensor
- Position: Front
- Replaces: YL5Z-2C204-AB
- Base No.: 2C204
- Item Weight: 1.20 Pounds
- Item Dimensions: 15.6 x 10.7 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: XL2Z-2C204-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2004 Ford Ranger ABS Sensor, Front Passenger Side Part Number: 6L5Z-2C204-AA
$57.90 MSRP: $95.27
You Save: $37.37 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Right; Speed Sensor; Front Speed Sensor; ABS Wheel Speed Sensor
- Position: Front Passenger Side
- Replaces: 3L5Z-2C204-AA
- Base No.: 2C204
- Item Weight: 0.70 Pounds
- Item Dimensions: 19.4 x 6.3 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-2C204-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2004 Ford Ranger ABS Sensor, Front Part Number: 6L5Z-2C204-BA
$50.50 MSRP: $83.09
You Save: $32.59 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; ABS Speed Sensor; Speed Sensor; Front Speed Sensor; ABS Wheel Speed Sensor
- Position: Front
- Replaces: 3L5Z-2C204-BA
- Base No.: 2C204
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.4 x 19.8 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-2C204-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2004 Ford Ranger ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Ranger ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Ranger ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford Ranger ABS Sensor Parts Q&A

Q: How to service the rear ABS sensor on 2004 Ford Ranger?
A: Service of the rear ABS sensor starts by raising the vehicle then supporting it. Eliminate all debris which surrounds the sensor in the rear anti-lock brake assembly prior to taking it out. You should disconnect the electrical connector followed by the bolt removal and finally remove the sensor. You must clean the mounting surface before checking the anti-lock brake sensor O-ring for damage. Lightly apply axle lubricant to it when no damage is found. Finish the assembly operation by executing the reverse steps of removal work.