How to service and repair the rear parking brake cable on 2004 Ford Ranger?

Service and repair operations on the rear parking brake cable must start by releasing the parking brake control and then releasing tension from the parking brake system. The first step is to pull down the front parking brake cable with conduit while inserting a 4 mm (5/32 inch) drill bit or its equivalent retainer. Start the procedure by pulling off the drum brake shoes followed by disconnecting the parking brake intermediate cable from the locating hole end and then severing it from the LH parking brake rear cable and conduit. Cut both RH parking brake rear cable and conduit parts at the parking brake cable equalizer where they cross the LH parking brake rear cable and conduit. The next step involves removing both the RH parking brake rear cable and wire form bracket while compressing the parking brake cable clip then opening the retaining clip before taking out the LH parking brake rear cable and conduit from the parking brake cable bracket. The next step includes removing the RH parking brake rear cable and conduit from its clips alongside the hydraulic brake line before unfastening the brake cable from the rear axle housing top hardware. The parking brake rear cable attachment to the parking brake lever needs to be disconnected followed by moving the parking brake rear cable through retainer fingers to perform removal. Installation of the new components requires a reversal of the removed parts sequence.

OEM 2004 Ford Ranger Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Parking Brake Cables found

View related parts
2004 Ford Ranger Rear Cable, Passenger Side
Part Number: 6L5Z-2A635-AAA
$50.34 MSRP: $84.36
You Save: $34.02 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Passenger Side
- Replaces: 6L5Z-2A635-AA
- Base No.: 2A635
- Item Weight: 2.20 Pounds
- Item Dimensions: 0.1 x 14.1 x 14.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L5Z-2A635-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2004 Ford Ranger Front Cable
Part Number: 4L5Z-2853-AA
$36.07 MSRP: $57.27
You Save: $21.20 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Parking Brake Cable, Front; Brake Cable
- Position: Front
- Replaces: 3L5Z-2853-AA
- Base No.: 2853
- Item Weight: 1.20 Pounds
- Item Dimensions: 1.5 x 1.6 x 45.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L5Z-2853-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2004 Ford Ranger Rear Cable, Driver Side
Part Number: 1L5Z-2A635-DB
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Cable asy. (brake rear) - LH - 9 and 10" brakes - 2001/2002
- Position: Driver Side
- Base No.: 2A635
- Item Weight: 1.70 Pounds
- Item Dimensions: 0.1 x 14.4 x 14.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-2A635-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Ranger Submodels:
- Edge, FX4, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2004 Ford Ranger Rear Cable, Driver Side
Part Number: XL5Z-2A635-BB
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Cable asy. (brake rear) - LH - 9 and 10" brakes- 1998/2000
- Position: Driver Side
- Base No.: 2A635
- Item Weight: 1.70 Pounds
- Item Dimensions: 0.1 x 14.3 x 14.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL5Z-2A635-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Ranger Submodels:
- Edge, FX4, Splash, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2004 Ford Ranger Rear Cable
Part Number: 2L5Z-2A635-BA
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Replaces: 1L5Z-2A635-DA
- Item Weight: 2.10 Pounds
- Item Dimensions: 11.9 x 8.8 x 19.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L5Z-2A635-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Ranger Submodels:
- Edge, FX4, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2004 Ford Ranger Parking Brake Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Ranger Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Ranger Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford Ranger Parking Brake Cable Parts Questions & Experts Answers

Q: How to service and repair the rear parking brake cable on 2004 Ford Ranger?
A: Service and repair operations on the rear parking brake cable must start by releasing the parking brake control and then releasing tension from the parking brake system. The first step is to pull down the front parking brake cable with conduit while inserting a 4 mm (5/32 inch) drill bit or its equivalent retainer. Start the procedure by pulling off the drum brake shoes followed by disconnecting the parking brake intermediate cable from the locating hole end and then severing it from the LH parking brake rear cable and conduit. Cut both RH parking brake rear cable and conduit parts at the parking brake cable equalizer where they cross the LH parking brake rear cable and conduit. The next step involves removing both the RH parking brake rear cable and wire form bracket while compressing the parking brake cable clip then opening the retaining clip before taking out the LH parking brake rear cable and conduit from the parking brake cable bracket. The next step includes removing the RH parking brake rear cable and conduit from its clips alongside the hydraulic brake line before unfastening the brake cable from the rear axle housing top hardware. The parking brake rear cable attachment to the parking brake lever needs to be disconnected followed by moving the parking brake rear cable through retainer fingers to perform removal. Installation of the new components requires a reversal of the removed parts sequence.