OEM 2004 Ford Ranger Headlight Switch

2004 Ford Ranger Headlight Switch Parts Questions & Experts Answers

• Q: How to service the Headlight Switch on 2004 Ford Ranger?

  A: The service of the headlamp switch begins by unplugging the battery ground cable. The radio finish panel assembly requires removal by separating bolts then pulling out the assembly. The radio bezel assembly needs to be disconnected first with subsequent hood latch release handle removal that requires screw disassembly. The work commences with unscrewing the lower instrument panel cover before extracting the lower instrument panel reinforcement by unfastening its bolts. Move the column gear shift lever outside of working position if it exists during this procedure. To access the cluster finish panel you must first remove all screws and pull it out while following with a connector removal process to detach everything needed before extracting the finish panel. Unbolt the headlamp switch knob before removing the switch by unfastening its screws. To install the part follow the instructions for removal in the reverse order. The vehicle will show unexpected driver behavior after battery disconnection and reconnection since it needs to learn its adaptive strategy through extended driving of at least 16 km (10 mi).