How to service the heater core on 2004 Ford Ranger?

A leak test of the heater core must be performed before its removal if leakage is suspected. Service of the heater core requires first removing the evaporator core housing then moving to the instrument panel's components. You should start by disconnecting the PCM heat sink after unthreading the ground strap screw and the heat sink itself. Afterwards you should take out four nuts that sit on the dash panel's engine side while placing the plenum chamber onto the floor of the vehicle. Unscrewing the heater core cover allows access for removing first the heater core itself. The procedure for installing the components requires following the opposite steps of removal and adding a fresh oval-shaped foam seal to each heater core opening.

OEM 2004 Ford Ranger Heater Core

HVAC Heater Core

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Heater Cores found

View related parts
2004 Ford Ranger Heater Core
Part Number: H2MZ-18476-AC
$70.89 MSRP: $112.56
You Save: $41.67 (38%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Heater Assembly - Less Radiator; HVAC Heater Core; Core
- Replaces: F5TZ-18476-A, HC-14
- Item Weight: 2.50 Pounds
- Item Dimensions: 8.4 x 10.9 x 10.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: H2MZ-18476-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2004 Ford Ranger Heater Assembly
Part Number: 9L5Z-18471-B
Product Specifications
- Other Name: Duct - Air Vent; HVAC Heater Core Case Assembly; Heater Core Case; HVAC Unit Case; Heater Core; Housing Assembly; Case Assembly; Heater Case
- Replaces: 7L5Z-18471-A, 8L5Z-18471-A, 9L5Z-18471-A
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L5Z-18471-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Ranger Submodels:
- Edge, FX4, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2004 Ford Ranger Heater Core

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Ranger Heater Core available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Ranger Heater Core as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford Ranger Heater Core Parts Questions & Experts Answers

Q: How to service the heater core on 2004 Ford Ranger?
A: A leak test of the heater core must be performed before its removal if leakage is suspected. Service of the heater core requires first removing the evaporator core housing then moving to the instrument panel's components. You should start by disconnecting the PCM heat sink after unthreading the ground strap screw and the heat sink itself. Afterwards you should take out four nuts that sit on the dash panel's engine side while placing the plenum chamber onto the floor of the vehicle. Unscrewing the heater core cover allows access for removing first the heater core itself. The procedure for installing the components requires following the opposite steps of removal and adding a fresh oval-shaped foam seal to each heater core opening.