My Garage
Cart

OEM 2004 Ford Ranger Blend Door Actuator

Air Blend Door Actuator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

  • 2004 Ford Ranger Blend Door Actuator Diagram - YL5Z-19E616-AA
    View related parts

    2004 Ford Ranger Motor Assembly Part Number: YL5Z-19E616-AA

    $42.48 MSRP: $68.55
    You Save: $26.07 (39%)
    ADD TO CART
    Product Specifications
    • Other Name: HVAC Air Inlet Door Actuator; HVAC Blend Door Actuator; HVAC Heater Blend Door Actuator; Blower Motor; Actuator
    • Replaces: F87Z-19E616-BA
    • Base No.: 19E616
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 8.6 x 7.6 x 7.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: YL5Z-19E616-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2004 Ford Ranger Submodels:
    • Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2004 Ford Ranger Blend Door Actuator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Ranger Blend Door Actuator available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Ranger Blend Door Actuator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford Ranger Blend Door Actuator Parts Q&A

  • Q: How to service the temperature blend door actuator on 2004 Ford Ranger?
    A: The first step for servicing the temperature blend door actuator requires removal of the passenger air bag module and the defroster opening grill. The right-hand demister hose needs to be detached from its position before being set aside. Take out the screws which fasten the anti-theft or keyless entry module then store this module to the side. Access the actuator through the right-hand defroster nozzle opening and remove the screw by taking out the temperature blend door actuator after you disconnect its electrical connector and remove all screws. Installation of the new actuator should follow the same steps in reverse order to the uninstallation process.