How to service the ignition coil on 2004 Ford Ranger?

Service of the ignition coil requires the removal of its electrical connector in the first step. You should avoid yanking the spark plug wire to prevent it from falling loose from its boot connector inside the plug wire connectorthus disconnect the wires through an upward pull combined with a twisting motion. The procedure begins with disconnecting the heater hose support from its stud and proceeding to remove the two bolts and one stud and the ignition coil. Illuminate the ignition coil towers and clean them with soap solution applied to a dampened wipe. During the installation procedure follow the reversal of removal steps and apply silicone brake caliper grease to every part of the boot's interior surface using a small clean tool.

OEM 2004 Ford Ranger Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Ignition Coils found

View related parts
2004 Ford Ranger Ignition Coil
Part Number: 5F2Z-12029-AD
$79.89 MSRP: $131.45
You Save: $51.56 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil Oe Quality; Direct Ignition Coil; Coil
- Replaces: 1F2Z-12029-AC
- Base No.: 12029
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.5 x 4.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5F2Z-12029-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Ranger Submodels:
- Edge, Sport, STX, Tremor, XL, XLT | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2004 Ford Ranger Ignition Coil
Part Number: 1S7Z-12029-AD
$66.74 MSRP: $109.82
You Save: $43.08 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil Oe Quality; Distributor Less Coil; Direct Ignition Coil; Coil
- Replaces: 1S7Z-12029-AA
- Base No.: 12029
- Item Weight: 1.80 Pounds
- Item Dimensions: 6.4 x 4.5 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1S7Z-12029-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Ranger Submodels:
- Sport, STX, XL, XLT | 4 Cyl 2.3 L GAS
View related parts
2004 Ford Ranger Ignition Coil
Part Number: FOTZ-12029-A
$83.87 MSRP: $138.00
You Save: $54.13 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Distributor Less Coil; Coil
- Manufacturer Note: OHV, SOHC
- Base No.: 12029
- Item Weight: 4.40 Pounds
- Item Dimensions: 8.2 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: FOTZ-12029-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Ranger Submodels:
- Custom, Edge, FX4, S, S Plus, Splash, Sport, STX, Tremor, XL, XL Sport, XLT | 6 Cyl 4.0 L GAS

2004 Ford Ranger Ignition Coil

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Ranger Ignition Coil available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Ranger Ignition Coil as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford Ranger Ignition Coil Parts Questions & Experts Answers

Q: How to service the ignition coil on 2004 Ford Ranger?
A: Service of the ignition coil requires the removal of its electrical connector in the first step. You should avoid yanking the spark plug wire to prevent it from falling loose from its boot connector inside the plug wire connectorthus disconnect the wires through an upward pull combined with a twisting motion. The procedure begins with disconnecting the heater hose support from its stud and proceeding to remove the two bolts and one stud and the ignition coil. Illuminate the ignition coil towers and clean them with soap solution applied to a dampened wipe. During the installation procedure follow the reversal of removal steps and apply silicone brake caliper grease to every part of the boot's interior surface using a small clean tool.