How to service and repair the turn signal switch on 2004 Ford Ranger?

The first step to work on the turn signal switch requires disconnecting the battery. The ignition key must be inserted into the lock cylinder until it reaches the position marked RUN before using the punch to push the release tab which allows the cylinder to be extracted. You should take off the tilt wheel handle before continuing with the work. The installation of the upper and lower steering column shrouds begins by unscrewing each of their attached screws. Remove the multifunction switch after disconnecting all electric connectors and unscrewing it. Finish the installation by following the reverse steps of removal.

OEM 2004 Ford Ranger Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Turn Signal Switch found

View related parts
2004 Ford Ranger Turn Signal Switch Part Number: 7L5Z-13K359-AA
$224.17 MSRP: $307.56
You Save: $83.39 (28%)
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Direction Indicator; Combination Switch; Multi Purpose Switch
- Replaces: 4L5Z-13K359-AAB
- Base No.: 13K359
- Item Weight: 0.70 Pounds
- Item Dimensions: 10.3 x 4.5 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L5Z-13K359-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Ranger Submodels:
- Edge, FX4, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2004 Ford Ranger Turn Signal Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Ranger Turn Signal Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Ranger Turn Signal Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford Ranger Turn Signal Switch Parts Q&A

Q: How to service and repair the turn signal switch on 2004 Ford Ranger?
A: The first step to work on the turn signal switch requires disconnecting the battery. The ignition key must be inserted into the lock cylinder until it reaches the position marked RUN before using the punch to push the release tab which allows the cylinder to be extracted. You should take off the tilt wheel handle before continuing with the work. The installation of the upper and lower steering column shrouds begins by unscrewing each of their attached screws. Remove the multifunction switch after disconnecting all electric connectors and unscrewing it. Finish the installation by following the reverse steps of removal.