How to service the Brake Light Switch on 2004 Ford Taurus?

One needs to start servicing the Brake Pedal Position (BPP) switch by disconnecting the battery ground cable. Disconnection of the electrical connector followed by removal of the self-locking pin constitutes the next step. After the Brake Pedal Position switch needs removal from the brake master cylinder push rod. Follow the reverse steps for BPP switch installation after completion of removal.

OEM 2004 Ford Taurus Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2004 Ford Taurus Stoplamp Switch Part Number: 3F1Z-13480-AA
$41.45 MSRP: $65.82
You Save: $24.37 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Stop Light; Brake Light Switch
- Manufacturer Note: service kit - includes pigtails for servicing prior year models.
- Replaces: 1F1Z-14A411-BA, 1F1Z-14A411-CA, SW-5567, YF1Z-13480-BA, 4F1Z-13480-BA
- Base No.: 14A411
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.7 x 2.7 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F1Z-13480-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2004 Ford Taurus Brake Light Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Taurus Brake Light Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Taurus Brake Light Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford Taurus Brake Light Switch Parts Q&A

Q: How to service the Brake Light Switch on 2004 Ford Taurus?
A: One needs to start servicing the Brake Pedal Position (BPP) switch by disconnecting the battery ground cable. Disconnection of the electrical connector followed by removal of the self-locking pin constitutes the next step. After the Brake Pedal Position switch needs removal from the brake master cylinder push rod. Follow the reverse steps for BPP switch installation after completion of removal.