How to remove the rear seat cushion and ensure proper installation for safety on 2004 Lincoln Town Car?

Along the lower front edge of the rear seat cushion pad and frame use gentle pressure before pushing the cushion towards the rear to disconnect front retainers that will position the cushion forward. Drivers must first label and disconnect electrical connectors of vehicles with rear heated seats before starting the work process. Full seating of retaining wires in retainer brackets of the rear seat cushion pad and frame and rear seat backrest pad and frame is essential during installation to stop the seat backrest or cushion from sliding during collisions which can cause personal injuries. You must verify that the active restraint system functions correctly as the final examination step.

OEM 2004 Lincoln Town Car Seat Cushion

Seat Pad Cushion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Seat Cushions found

View related parts
2004 Lincoln Town Car Seat Cushion Pad, Driver Side
Part Number: 5W1Z-54632A23-BA
Product Specifications
- Other Name: Pad - Seat Cushion; Seat Cushion
- Manufacturer Note: Less Passenger Weight Sensor
- Position: Driver Side
- Replaces: 5W1Z-54632A23-AA
- Base No.: 632A23
- Item Weight: 7.10 Pounds
- Item Dimensions: 27.6 x 24.5 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5W1Z-54632A23-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Lincoln Town Car Submodels:
- Cartier, Cartier L, Designer Series, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2004 Lincoln Town Car Seat Cushion Pad, Passenger Side
Part Number: 4W1Z-54632A22-AB
Product Specifications
- Other Name: Pad; Seat Cushion
- Manufacturer Note: Less Passenger Weight Sensor
- Position: Passenger Side
- Base No.: <632A22
- Item Weight: 7.40 Pounds
- Item Dimensions: 31.2 x 30.9 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4W1Z-54632A22-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Lincoln Town Car Submodels:
- Cartier, Cartier L, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Signature L, Signature Limited, Ultimate, Ultimate L | 8 Cyl 4.6 L GAS
View related parts
2004 Lincoln Town Car Seat Back Pad
Part Number: 3W1Z5464810BA
Product Specifications
- Other Name: Pad
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W1Z5464810BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2004 Lincoln Town Car Submodels:
- Cartier, Cartier L, Executive, Executive L, Executive Protection Series, Protection Series, Signature, Ultimate, Ultimate L | 8 Cyl 4.6 L GAS
View related parts
2004 Lincoln Town Car Seat Cushion Pad, Rear
Part Number: 3W1Z-54600A88-AB
Product Specifications
- Other Name: Pad - Rear Seat Cushion; Seat Cushion
- Position: Rear
- Base No.: 600A88
- Item Weight: 11.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W1Z-54600A88-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Lincoln Town Car Submodels:
- Designer Series, Signature, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2004 Lincoln Town Car Seat Cushion

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Lincoln Town Car Seat Cushion available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Lincoln Town Car Seat Cushion as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Lincoln Town Car Seat Cushion Parts Questions & Experts Answers

Q: How to remove the rear seat cushion and ensure proper installation for safety on 2004 Lincoln Town Car?
A: Along the lower front edge of the rear seat cushion pad and frame use gentle pressure before pushing the cushion towards the rear to disconnect front retainers that will position the cushion forward. Drivers must first label and disconnect electrical connectors of vehicles with rear heated seats before starting the work process. Full seating of retaining wires in retainer brackets of the rear seat cushion pad and frame and rear seat backrest pad and frame is essential during installation to stop the seat backrest or cushion from sliding during collisions which can cause personal injuries. You must verify that the active restraint system functions correctly as the final examination step.