Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2004 Mercury Marauder ABS Sensor

ABS Wheel Speed Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 ABS Sensor found

  • 2004 Mercury Marauder ABS Sensor - 3W1Z-2C190-AB
    2004 Mercury Marauder ABS Sensor Diagram - 3W1Z-2C190-AB
    View related parts

    2004 Mercury Marauder ABS Sensor, Rear
    Part Number: 3W1Z-2C190-AB

    Product Specifications
    • Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Left, Rear Right; Rear Speed Sensor; ABS Wheel Speed Sensor
    • Position: Rear
    • Base No.: 2C190
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 7.4 x 2.6 x 7.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 3W1Z-2C190-AB
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2004 Mercury Marauder Submodels:
    • Base | 8 Cyl 4.6 L GAS

2004 Mercury Marauder ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Mercury Marauder ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Mercury Marauder ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Mercury Marauder ABS Sensor Parts Questions & Experts Answers

  • Q: How to service the front ABS sensor on 2004 Mercury Marauder?
    A: Service of the front ABS sensor must start with disconnecting the front anti-lock brake sensor electrical connector. Disabling air suspension electrical power is essential before vehicle hoisting or jacking activities or towing starts to stop unwanted changes in air springs that may cause vehicle movement. The vehicle needs to be lifted up while using support then the routing clips need removal. Before removing the front ABS sensor it is necessary to clean completely the surrounding area to eliminate all dirt and debris. Users should pry the front anti-lock brake sensor out of its housing by using a flat-blade screwdriver to push its tabs inward. A repair kit with part number 2C577 and containing necessary front ABS sensor wire clips can be obtained. Follow the reverse steps of removal while installing the new sensor while ensuring all foreign debris is eliminated from the area.

Related 2004 Mercury Marauder Parts

Alternate Year Models

+
2003 Mercury Marauder ABS Sensor