How to service and repair the front antenna cable on 2004 Mercury Marauder?

The front antenna lead-in cable servicing process starts with removing the audio unit to disconnect the antenna cable guide. Put aside the right-hand lower instrument panel insulator while you remove pin-type retainers then release the locking tab and disconnect the courtesy lamp. Disconnect the radio antenna lead-in cable and extract the antenna cable bracket screw. Start by removing the center carpet insert through the removal of its two pin-type retainers. To continue move the antenna lead-in cable out by unclipping its three retainers. To install you should perform the uninstallation steps in reverse order.

OEM 2004 Mercury Marauder Antenna Cable

Radio Antenna Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Antenna Cables found

View related parts
2004 Mercury Marauder Cable, Rear
Part Number: YW3Z-18812-AB
Product Specifications
- Other Name: Cable Assembly - Extension; Antenna Cable, Rear
- Manufacturer Note: Cable asy - radio antenna, from intermediate cable to backglass
- Position: Rear
- Base No.: 18812
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YW3Z-18812-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Mercury Marauder Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2004 Mercury Marauder Cable, Rear
Part Number: 7W7Z-18812-A
Product Specifications
- Other Name: Cable Assembly - Extension; Antenna Cable, Rear; Amplifier
- Position: Rear
- Replaces: 6W7Z-18812-B
- Base No.: 18812
- Item Weight: 0.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7W7Z-18812-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Mercury Marauder Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2004 Mercury Marauder Extension
Part Number: 5W7Z-18812-BA
Product Specifications
- Other Name: Cable Assembly - Extension
- Manufacturer Note: Radio antenna lead-in cable assembly, #2 in illustration, short wheel base only, attaches to antenna connector, 3825mm (12.50 feet)
- Base No.: 18812
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5W7Z-18812-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Mercury Marauder Submodels:
- Base | 8 Cyl 4.6 L GAS

2004 Mercury Marauder Antenna Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Mercury Marauder Antenna Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Mercury Marauder Antenna Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Mercury Marauder Antenna Cable Parts Questions & Experts Answers

Q: How to service and repair the front antenna cable on 2004 Mercury Marauder?
A: The front antenna lead-in cable servicing process starts with removing the audio unit to disconnect the antenna cable guide. Put aside the right-hand lower instrument panel insulator while you remove pin-type retainers then release the locking tab and disconnect the courtesy lamp. Disconnect the radio antenna lead-in cable and extract the antenna cable bracket screw. Start by removing the center carpet insert through the removal of its two pin-type retainers. To continue move the antenna lead-in cable out by unclipping its three retainers. To install you should perform the uninstallation steps in reverse order.