How to remove and install the front bumper cover on all on 2004 Mercury Marauder?

When it is imperative to take off the front bumper cover, one has to lift the vehicle up and remove six lower radiator air deflector bolts, two front bumper cover bolts, and six pin-type retainers. In the case of the Marauder, loosen screws of fog lamps. Following the lowering of the vehicle, remove the Headlamp assemblies, and other screws and then unleash the four tabs to eliminate the cover. Install to reverse the install.

OEM 2004 Mercury Marauder Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Bumpers found

View related parts
2004 Mercury Marauder Reinforcement, Rear Part Number: 3W7Z-17906-AA
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Cover Reinforcement Beam, Rear
- Manufacturer Note: (CP) Designates Crash Part - When Ordering Please Refer To Crash Part Truckload Program Guidelines
- Position: Rear
- Replaces: F8AZ-17906-AA
- Base No.: 17906
- Item Weight: 25.90 Pounds
- Item Dimensions: 6.6 x 57.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W7Z-17906-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Mercury Marauder Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2004 Mercury Marauder Bumper Cover Part Number: 3W3Z-17K835-AAA
Product Specifications
- Other Name: Cover
- Manufacturer Note: Paint to match, Marauder
- Base No.: 17K835
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W3Z-17K835-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Mercury Marauder Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2004 Mercury Marauder Bumper Cover Part Number: 3W3Z-17D957-AAA
Product Specifications
- Other Name: Cover
- Manufacturer Note: Paint to match, Marauder
- Base No.: 17D957
- Item Weight: 15.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W3Z-17D957-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Mercury Marauder Submodels:
- Base | 8 Cyl 4.6 L GAS
View related parts
2004 Mercury Marauder Impact Bar, Front Part Number: 3W3Z-17757-AA
Product Specifications
- Other Name: Bumper Assembly - Front
- Manufacturer Note: Steel, Maruader
- Position: Front
- Base No.: 17757
- Item Weight: 16.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W3Z-17757-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2004 Mercury Marauder Submodels:
- Base | 8 Cyl 4.6 L GAS

2004 Mercury Marauder Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Mercury Marauder Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Mercury Marauder Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Mercury Marauder Bumper Parts Q&A

Q: How to remove and install the front bumper cover on all on 2004 Mercury Marauder?
A: When it is imperative to take off the front bumper cover, one has to lift the vehicle up and remove six lower radiator air deflector bolts, two front bumper cover bolts, and six pin-type retainers. In the case of the Marauder, loosen screws of fog lamps. Following the lowering of the vehicle, remove the Headlamp assemblies, and other screws and then unleash the four tabs to eliminate the cover. Install to reverse the install.