OEM 2004 Mercury Monterey Brake Master Cylinder

2004 Mercury Monterey Brake Master Cylinder Parts Questions & Experts Answers

• Q: What precautions should be taken when servicing the brake master cylinder and brake booster on 2004 Mercury Monterey?

  A: It is essential to service brake master cylinder and brake booster with DOT 3 motor vehicle brake fluid since other fluids will produce permanent damage that makes brakes unoperable leading to injuries. Contact with eyes should be avoided when working with brake fluid since it contains polyglycol ethers and polyglycols so you must wash your hands completely before continuing with other tasks. If eyes get into contact with the fluid seek medical attention because continued irritation requires professional help. To flush the eyes properly use running water for 15 minutes. After ingesting such fluid you need to drink water followed by vomiting induction then get rapid medical help. Brake fluid damages painted and plastic surfaces therefore any spillage requires immediate cleaning with water. The bleeding operation requires watching the brake master cylinder reservoir at all times to maintain its liquid level and dismissing any drained brake fluid for reuse. The first step requires battery removal followed by air cleaner assembly disconnection. The procedure must be followed exactly to drain and remove components while employing an appropriate vacuum tool to suck out reservoir contents. The brake master cylinder needs to be oriented towards the front while removing the brake booster. First disconnect the speed control and accelerator cables before removing the wiring harness retaining bracket and finally detach the cable bracket bolts to set the bracket aside. The speed control module can be set aside after unfastening the bolts. The reservoir needs draining through an appropriate suction device before its removal. Resumption of the removal procedure should be followed by brake system bleeding and inspection of proper vehicle operation. Use a cap to close the brake line while you should plug master cylinder ports when pulling out brake tube fittings.