Ford 2F2Z-2140-AA
Master Cylinder

Service and repair of the brake master cylinder begins with disconnecting the battery followed by air cleaner assembly removal. A suitable suction device should drain the reservoir before removal during which point you should disconnect the brake pressure switch and brake fluid level switch electrical connectors. Secure the brake line with a lid once you disconnect its fittings. At the same time plug the master cylinder opening. The brake master cylinder requires two nuts removal that needs tightening to 25 Nm (18 ft. lbs.) levels while installation occurs. Back up the brake master cylinder removal steps by installing it reverse-order while performing brake system bleeding after installation. Using unauthorized DOT 3 motor vehicle brake fluid for equipment will result in lasting damage to braking parts while simultaneously destroying braking functionality. Brake fluid requires safe handling because it generates hazard to painted surfaces as well as plastic materials therefore immediate water-based cleaning of spillages is necessary. Eye contact with brake fluid requires 15 minutes of water flushing followed by medical care if the eyes remain irritated. Drinking water followed by vomiting induction leads to immediate medical assistance for any accidental consumption of this material.

Drain it using a suitable suction device.