FordParts
My Garage
My Account
Cart
OEM 2005 Ford Crown Victoria Air Bag Sensor
Air Bag Impact Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Air Bag Sensors found
2005 Ford Crown Victoria Side Impact Sensor, Front Outer Part Number: 6W1Z-14B345-AA
$86.88 MSRP: $120.19You Save: $33.31 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor, Front Outer; Air Bag Sensor; Side Sensor
- Manufacturer Note: RH/LH
- Position: Front Outer
- Replaces: 5W1Z-14B345-AA
- Base No.: 14B345
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.8 x 3.9 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6W1Z-14B345-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Sensor Assembly; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor
- Position: Front
- Base No.: 14B004
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.3 x 1.8 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5W1Z-14B004-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Crown Victoria Air Bag Sensor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Crown Victoria Air Bag Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Crown Victoria Air Bag Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford Crown Victoria Air Bag Sensor Parts Q&A
- Q: How Should the Side Impact Air Bag Sensor Be Serviced to Ensure Safety and Proper Functionality on 2005 Ford Crown Victoria?A: Safety glasses should always be worn when serving the side impact sensor because it protects against potential air bag-related injuries and prevents the use of memory saver devices. The correct position of Vehicle sensors depends on system function so a post-collision check should inspect both sensor brackets and wiring pigtail for deformities but replacements and restorations should occur regardless of air bag deployment. The RCM fuse removal will cause the air bag warning lamp to turn on while the ignition switch is ON but this condition does not imply any system fault. Thoroughly check the SRS system for all faults before giving the vehicle back to the customer. Repair procedures require new parts installation and you should retest after reinstallation of the original component. Each side impact sensor exists at the base of the B-pillars. Depower the system before you remove the driver side front scuff plates and rear scuff plates followed by the B-Pillar weather stripping on the same side. To take off the driver side B-pillar lower trim panel users must first release its retaining clips. Unbolt the specified sequence of side impact sensor fasteners and detach the electrical wire before removing the sensor with the bracket. The installation process requires proper torque retention of air bag side impact sensor retaining bolts together with sequential sensor insertion after reconnecting the electrical connector and returning restored trim panel together with weather stripping and scuff plates before the system powering up.