OEM 2005 Ford E-150 Brake Master Cylinder

2005 Ford E-150 Brake Master Cylinder Parts Questions & Experts Answers

• Q: How to service and repair the Brake Master Cylinder with Hydro-Boost on 2005 Ford E-150?

  A: A responsible first step for servicing and repairing the Brake Master Cylinder with Hydro-Boost requires disconnecting the battery. Auction device should be used to extract brake fluid through the brake master cylinder reservoir. Start by removing the coolant reservoir bolts followed by placing the reservoir to the side. The service of diesel engine components begins by removing the coolant hoses from the air cleaner outlet tube followed by loosening the clamp to disconnect the tube and finally disconnecting the mass air flow (MAF) sensor connector through the red lock and pressing the tab. Unhook the air cleaner cover by disconnecting its three latches. Gasoline-powered vehicles need users to first disconnect the power cable from the power distribution box before setting the box to the side. Proceed to detach three components: the brake fluid level switch electrical connector, the speed control deactivator switch electrical connector and also the master cylinder brake lines. Remove the nuts together with the power steering line clamp while discarding the brake master cylinder nuts since they are torque-prevailing type and nonreusable. First disconnect power steering line bracket and after that you can remove the brake master cylinder. Reinstallation of the new brake master cylinder requires following the reverse steps from removal while also performing brake system bleeding.