Other Name: Bulb; Center High Mount Stop Light, Rear; Engine Compartment, Back Up, Turn Signal; Parking, Dome, Interior, Tail, Car; Backup Lamp Bulb; Dome Lamp Bulb; Parking Lamp Bulb; High Mount Bulb; Exterior Bulbs.
Position: Rear
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: D7TZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2005 Ford E-250 Submodels:
Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
Other Name: Bulb, Turn Signal & Parking, Tail, Backup, License Plate, Side Marker, Headlight; Backup Lamp Bulb; Signal, Parking, Stop, High Mount, Cornering, License, and Parking Light Bulbs.
Position: Lower Outer
Replaces: F8DZ-13466-AB, E8AZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: F5DZ-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2005 Ford E-250 Submodels:
Base | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
2005 Ford E-250 Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford E-250 Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford E-250 Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford E-250 Headlight Bulb Parts Questions & Experts Answers
Q: How to Safely and Correctly Service the Aerodynamic Headlight Bulb on 2005 Ford E-250?
A: The servicing procedure of aerodynamic headlamp bulbs requires safety precautions due to high pressure gas within the bulb which can cause shattering when the glass envelope encounters damages. Take the bulb by its base while being cautious to keep away from touching the glass to preserve safety. Placing the headlamp bulb in position should occur only moments before installation of a new one to prevent contaminants from entering the headlamp system. It is unsafe to operate the headlamps after removing the bulb. Start by taking out the headlamp followed by removing the headlamp bulb's retainer using counterclockwise rotation of one-eighth turn to extract the bulb. The replacement bulbs referred to as No. 9004 and No. 9007 share the same dimensions while being distinct from one another for installation purposes. You should first position the new bulb correctly before turning the bulb retainer clockwise one-eighth turn to complete the installation process of the headlamp.