Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

Ford 6E5Z-13466-AC
Tail Lamp Bulb, Rear

2005-2024 Ford 6E5Z13466AC

Customer Questions & Expert Answers (59)
Ford 6E5Z-13466-AC Tail Lamp Bulb, Rear
Ford 6E5Z-13466-AC Tail Lamp Bulb, Rear
Ford 6E5Z-13466-AC Tail Lamp Bulb, Rear
  • Part Description
    Bulb; Brake Light Bulb, Rear; Turn Signal Light Bulb; Tail Light Bulb; Parking Light Bulb; Car Bulbs
  • Base No.
    13466A
  • Position
    Rear
  • Replaces
    6E5Z-13466-AB
  • Manufacturer
    Ford
Make sure this part fits
$2.82 MSRP: $4.00
You Save: $1.18 (30%)
Ships in 1-3 Business Days
10
ADD TO CART
  • 2009 Ford F-250 Super Duty Tail Lamp Bulb, Rear Diagram for 6E5Z-13466-AC
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 6E5Z-13466-AC

  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Ford Crown VictoriaBase, LWB, LX, LX Sport, Police Interceptor8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
    2005-2014 Ford E-150Base, Chateau, XL, XLT8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
    2005 Ford E-150 Club WagonChateau, XL, XLT8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
    2005-2014 Ford E-250Base8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
    2005 Ford E-350 Club WagonChateau, XL, XLT10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL
    2021-2024, 2005-2019 Ford E-350 Super DutyBase, Chateau, XL, XLT10 Cyl 6.8 L CNG, 10 Cyl 6.8 L GAS, 10 Cyl 6.8 L LPG, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 7.3 L GAS
    2007-2010 Ford EdgeLimited, SE, SEL, SEL Plus, Sport6 Cyl 3.5 L GAS
    2006-2012 Ford EscapeHybrid, Limited, Limited Hybrid, XLS, XLT4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
    2007-2010 Ford ExpeditionEddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
    2007-2010 Ford Explorer Sport TracLimited, XLT6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is 6E5Z-13466-AC the part I need for my vehicle? Posted by FordPartsDeal Specialist
    A:
    Select Your Vehicle model to verify if part number 6E5Z-13466-AC fits your car.
    Posted by FordPartsDeal Specialist
    Q:
    How to Service the Fog Light Bulb on Ford F-350 Super Duty? Posted by Customer
    A:
    The initial step for fog lamp bulb service needs both the headlamp switch and ignition switch in OFF mode. The service procedure starts with placing the vehicle in NEUTRAL position before hoisting it. First disconnect the fog lamp electrical connector before turning the fog lamp bulb counterclockwise by one-eighth of a turn in order to remove it. To prevent injury always touch the bulb by its base because under pressure gas fills the bulb and it may break if the glass envelope receives scratches or hits something. You must replace the new bulb right after bulb removal to stop contaminants from entering the fog lamp because performance deterioration could occur. The installation procedure ends by returning to the order of steps from bulb removal.
    Posted by FordPartsDeal Specialist
    Q:
    How to Service the Instrument Panel Light Bulb on Ford E-150? Posted by Customer
    A:
    Service of the instrument cluster bulb begins with removing the instrument cluster. It is necessary to remove instrument cluster illumination bulbs. After reverse installation you should reinstall the steps in the reverse order of removal.
    Posted by FordPartsDeal Specialist
    Q:
    How to Safely and Correctly Service the Headlight Bulb on Ford Ranger? Posted by Customer
    A:
    Begin by handling the headlamp bulb base only since the bulb maintains pressure with gas inside and a broken glass envelope can occur through envelope scratches or drops. Before placing a new headlamp bulb the device should remain uninstalled until immediately before installation because airborne contaminants can damage the assembly. The first step requires you to take out the headlamp assembly. The headlamp bulb retainer requires a counterclockwise motion of one-eighth rotation to come loose before allowing you to remove both the retainer and bulb. Turn the installation procedure for the new bulb around to carry it out. Keep the headlamps off whenever the bulb remains uninstalled because this practice could harm components.
    Posted by FordPartsDeal Specialist
    Q:
    How to Service and Repair the Instrument Panel Light Bulb on Ford Ranger? Posted by Customer
    A:
    The instrument cluster (IC) removal stands first for servicing the instrument panel bulb. First remove both illumination sockets and bulbs from the instrument panel assembly. End the installation by repeating the reverse steps used for removal.
    Posted by FordPartsDeal Specialist
    Q:
    How to Service the Fog Light Bulb on Ford Ranger? Posted by Customer
    A:
    Service the fog lamp bulb by turning both headlamp switch and ignition switch OFF. Position the vehicle on a hoist when it is in the NEUTRAL gear. First disconnect the electrical connector and then remove the fog lamp bulb by holding its base because it contains compressed gas that could result in injury when touched or broken through envelope contact or impact. The glass envelope must not receive contact from any object and the bulb should stay out of the bulb socket for too long because surface contaminants that settle on the lens and reflector can degrade the bulb performance. Fog lamps must never be turned on after removing their bulb. Installation of the new bulb requires you to perform the steps in the reverse order of removal.
    Posted by FordPartsDeal Specialist
    Q:
    How should you handle the headlamp bulb for the 2008 Ford Crown Victoria? Posted by Customer
    A:
    Always avoid touching the glass envelope and only handle the bulb by its base.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What should you ensure before servicing the fog lamp bulb for the 2008 Ford Crown Victoria? Posted by Customer
    A:
    Ensure the ignition switch and headlamp switch are both in the OFF position.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    What precautions should be taken when handling the headlamp bulb for the 2009 Ford Crown Victoria? Posted by Customer
    A:
    Exercise caution as the bulb contains gas under pressure and may shatter if the glass envelope is scratched or dropped; handle the bulb only by its base and avoid touching the glass.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What should be ensured before beginning the bulb replacement for the 2007 Ford Edge? Posted by Customer
    A:
    Ensure the headlamp switch and ignition switch are both in the OFF position.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What is the first step in servicing the headlamp bulb for the 2008 Ford Edge? Posted by Customer
    A:
    Remove the headlamp bulb access cover.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    When should the bulb be removed for the 2006 Ford Escape? Posted by Customer
    A:
    The bulb should not be removed until just before a new one is installed.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How do you replace the bulb in the selector lever indicator for the 2008 Ford Expedition? Posted by Customer
    A:
    Remove the bulb retainers from the bezel and replace the bulb(s) as necessary.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Instrument Panel Light Bulb
    Q:
    What is the position required for the removal process for the 2007 Ford Edge? Posted by Customer
    A:
    The vehicle should be in NEUTRAL and positioned on a hoist.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    Are bulbs No. 9004 and No. 9007 interchangeable for the 2006 Ford E-150? Posted by Customer
    A:
    No, bulbs No. 9004 and No. 9007 are similar but not interchangeable.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What is the installation procedure for the new bulb for the 2009 Ford Escape? Posted by Customer
    A:
    Reverse the removal procedure, ensuring that the bulb is handled only by its base to avoid personal injury.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    How do you remove the headlamp bulb for the 2005 Ford E-250? Posted by Customer
    A:
    Rotate the bulb retainer counterclockwise one-eighth turn before taking out the bulb.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How should I handle the headlamp bulb for safety for the 2009 Ford E-250? Posted by Customer
    A:
    Handle the bulb only by its base, as it contains gas under pressure and may shatter if the glass envelope is scratched or dropped.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What is the first step to service the headlamp bulb for the 2007 Ford E-250? Posted by Customer
    A:
    First, remove the headlamp assembly.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What is the first step to service the headlamp bulb for the 2008 Ford E-150? Posted by Customer
    A:
    First, remove the headlamp assembly.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How should the fog lamp bulb be handled during removal for the 2007 Ford Explorer Sport Trac? Posted by Customer
    A:
    Handle the bulb only by its base to avoid contact with the glass envelope.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    What should be removed to access the fog lamp bulb for the 2008 Ford Edge? Posted by Customer
    A:
    Remove the two screws securing the fender splash shield and set it aside.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    How do you install the new bulbs for the 2005 Ford E-250? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Instrument Panel Light Bulb
    Q:
    What should you do to install the new bulb for the 2009 Ford Explorer Sport Trac? Posted by Customer
    A:
    Reverse the removal procedure, ensuring not to turn on the headlamps with the bulb removed.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How do you remove the headlamp bulb for the 2009 Ford F-250 Super Duty? Posted by Customer
    A:
    Rotate the headlamp bulb counterclockwise approximately one-eighth turn to remove it.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    Why is it important to handle the bulb carefully for the 2006 Ford F-250 Super Duty? Posted by Customer
    A:
    The glass envelope is under pressure and may shatter if scratched or dropped.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How should the electrical connector be handled for the 2006 Ford F-250 Super Duty? Posted by Customer
    A:
    Carefully disconnect the electrical connector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    Why should the headlamp bulb not be removed until just before a new bulb is installed for the 2007 Ford Expedition? Posted by Customer
    A:
    Extended removal can affect performance due to contaminants entering the headlamp.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What is the procedure for installation for the 2005 Ford F-250 Super Duty? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What should be done after installing the new bulb for the 2009 Ford Flex? Posted by Customer
    A:
    Reverse the removal procedure to complete the installation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What should you refrain from doing with the bulb after removal for the 2008 Ford F-250 Super Duty? Posted by Customer
    A:
    Refrain from removing the bulb for an extended period, as this may affect performance and allow contaminants to settle on the lens and reflector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    What is the first step to service the right headlamp bulb for the 2008 Ford Fusion? Posted by Customer
    A:
    Ensure the headlamp switch and ignition switch are in the OFF position.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What should be done to install the new bulb for the 2009 Ford Flex? Posted by Customer
    A:
    Reverse the removal procedure and ensure not to turn on the fog lamps with the bulb removed.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    What should you never do with the bulb removed for the 2008 Ford Fusion? Posted by Customer
    A:
    Never turn on the headlamps.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How should the be positioned for servicing for the 2009 Ford Fusion? Posted by Customer
    A:
    The vehicle should be in NEUTRAL and positioned on a hoist.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    What is the first step to service the headlamp bulb for the 2009 Ford Taurus? Posted by Customer
    A:
    Ensure the headlamp switch and ignition switch are both in the OFF position.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How should you handle the headlamp bulb for safety for the 2008 Ford Ranger? Posted by Customer
    A:
    Handle the bulb only by its base, as it contains gas under pressure and may shatter if the glass envelope is scratched or dropped.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What should be avoided to maintain the fog lamp bulb's performance for the 2008 Ford Taurus? Posted by Customer
    A:
    Refrain from removing the bulb for an extended period to prevent contaminants from entering the fog lamp assembly.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    How should I handle the headlamp bulb for safety for the 2008 Ford F-350 Super Duty? Posted by Customer
    A:
    Handle the bulb only by its base, as it contains gas under pressure and may shatter if the glass is scratched or if the bulb is dropped.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What should be done to install the new bulb for the 2006 Ford Ranger? Posted by Customer
    A:
    Reverse the removal procedure.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What is the first step to service the instrument cluster bulb for the 2008 Ford Taurus? Posted by Customer
    A:
    Remove the instrument cluster.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Instrument Panel Light Bulb
    Q:
    What should be done after removing the instrument cluster for the 2008 Ford Ranger? Posted by Customer
    A:
    Take out the illumination sockets and bulbs.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Instrument Panel Light Bulb
    Q:
    How should the be positioned for servicing for the 2009 Lincoln MKX? Posted by Customer
    A:
    The vehicle should be in NEUTRAL and positioned on a hoist.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    When should the fog lamp bulb be removed for the 2006 Ford Ranger? Posted by Customer
    A:
    The bulb should not be removed until just before installing a replacement to prevent contaminants from settling on the lens and reflector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    What is the first step to service the instrument cluster bulb for the 2006 Ford Ranger? Posted by Customer
    A:
    Remove the instrument cluster.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Instrument Panel Light Bulb
    Q:
    What is the final step after installing the new bulb for the 2009 Lincoln MKX? Posted by Customer
    A:
    Reverse the removal procedure to complete the installation.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What should be done after removing the instrument cluster for the 2005 Lincoln Town Car? Posted by Customer
    A:
    Take out the screws securing the instrument cluster back cover.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Instrument Panel Light Bulb
    Q:
    How do you remove the high beam bulb for the 2009 Lincoln Town Car? Posted by Customer
    A:
    Disconnect the electrical connector and take out the bulb.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How should the bulb be handled during removal for the 2008 Mercury Mariner? Posted by Customer
    A:
    Handle the bulb only by its base to avoid personal injury.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    When should the fog lamp bulb be removed for the 2008 Mercury Mariner? Posted by Customer
    A:
    The fog lamp bulb should not be removed until just before installing a new one, as contaminants can affect performance.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    Why is it important to avoid touching the glass envelope of the halogen bulb for the 2005 Lincoln Town Car? Posted by Customer
    A:
    The halogen bulb contains gas under pressure and may shatter if mishandled.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    What types of headlamp bulbs are mentioned for the 2008 Lincoln Town Car? Posted by Customer
    A:
    Halogen low beam, high intensity discharge (HID) low beam, and high beam bulbs.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What is the process for replacing the high beam bulb for the 2007 Lincoln Town Car? Posted by Customer
    A:
    Simply remove it and disconnect its electrical connector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How should the halogen bulb be handled during servicing for the 2007 Mercury Grand Marquis? Posted by Customer
    A:
    The halogen bulb should only be handled by its base to ensure safety, as it contains gas under pressure and may shatter if the glass is scratched or the bulb is dropped.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What is the procedure for removing the standard low beam bulb for the 2005 Lincoln Town Car? Posted by Customer
    A:
    Disconnect the electrical connector and remove the bulb.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    How do you disconnect the headlamp bulb for the 2009 Mercury Mariner? Posted by Customer
    A:
    Disconnect the electrical connector from the headlamp bulb.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Headlight Bulb
    Q:
    What is the first step in removing the fog lamp bulb for the 2007 Mercury Grand Marquis? Posted by Customer
    A:
    Remove the 4 screws securing the lower radiator air deflector.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    Q:
    What is the first step to service the instrument cluster bulb for the 2005 Ford F-350 Super Duty? Posted by Customer
    A:
    Remove the instrument cluster.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Instrument Panel Light Bulb
    Q:
    Why is it important to avoid touching the glass envelope of the bulb for the 2008 Ford Ranger? Posted by Customer
    A:
    The bulb contains gas under pressure and may shatter if the glass envelope is scratched or dropped.
    Posted by FordPartsDeal Specialist
    See expert answers on similar Fog Light Bulb
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM Ford Tail Lamp Bulb, Rear 6E5Z-13466-AC Designed for Proper Fit and Performance

The Ford part 6E5Z-13466-AC Tail Lamp Bulb, Rear as a genuine Ford Fog Light Bulb, Headlight Bulb, Instrument Panel Light Bulb component delivers both authenticity and reliability. This item carries a warranty from the manufacturer which guarantees 12-month, 12,000-mile of use. The Ford 6E5Z-13466-AC Tail Lamp Bulb, Rear is used with Ford Ranger, Fusion, Escape vehicles and Mercury Mariner, Grand Marquis models and Lincoln Town Car, MKX models. The original Ford part will bear the manufacturer part number: 6E5Z-13466-AC and where it is made at Ford. It has been specifically developed to fit the Rear and has the code: 13466A.
This component has dimensions of 4.4 x 1.8 x 2.9 inches and its weight is approximately 0.40 Pounds. The part 6E5Z13466AC is available in New condition while meeting the standards of the product rating. The Bulb; Brake Light Bulb, Rear; Turn Signal Light Bulb; Tail Light Bulb; Parking Light Bulb; Car Bulbs belongs to the Direct Replacement category to guarantee it is suitable for its specific vehicle applications. This part 6E5Z-13466-AC can be known as Parking Lamp Bulb; Stop Lamp Bulb; Signal Bulb; Exterior Bulbs, and it replaces 6E5Z-13466-AB. The inventory reference for this item is SKU: 6E5Z-13466-AC. The Ford manufacturer issues a factory warranty for this component which ensures dependable operation and peak performance. You can find delivery and returns information on our Shipping Policy and Return Policy pages.
Original equipment manufacturer parts are of the top standards and their performance is outstanding and top notch. This is explained by the fact that they follow the official manufacturing techniques of Ford, use of premium material and meets high standards of quality. Our site is worth visiting, in case you need high-quality and affordable OEM Ford components. We promise the optimal priced Ford parts on a wide range. You can relax that all OEM products you buy from us include a manufacturer warranty and will be covered by our simple and easy-to-use return policy, so you will not worry about buying a part.