FordParts
My Garage
My Account
Cart
OEM 2005 Ford Escape Brake Shoe
Brake Shoe Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Shoes found
2005 Ford Escape Parking Brake, Rear Part Number: 5L8Z-2A753-AA
$62.66 MSRP: $85.27You Save: $22.61 (27%)Product Specifications- Other Name: Shoe And Lining Assembly; Parking Brake Shoe, Rear; Brake Shoes; Parking Brake Shoes; Shoes; Parking Brake Shoe
- Position: Rear
- Base No.: 2648
- Item Weight: 3.30 Pounds
- Item Dimensions: 4.5 x 3.1 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-2A753-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Escape Brake Shoes, Rear Part Number: LU2Z-2V200-K
$44.51 MSRP: $66.65You Save: $22.14 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Pad - Brake; Drum Brake Shoe, Rear; Parking Brake Shoe; Rear Shoes
- Position: Rear
- Replaces: 1U2Z-2V200-RBRM, 6L8Z-2200-A, BR-11441-A, YL8Z-2200-AB, BRF-1421
- Condition: New
- Fitment Type: Direct Replacement
- SKU: LU2Z-2V200-K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Escape Brake Shoe
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Escape Brake Shoe available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Escape Brake Shoe as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford Escape Brake Shoe Parts Q&A
- Q: How to Service rear brake shoes and ensuring proper installation on 2005 Ford Escape?A: The installation of new rear brake shoes and linings requires brake drum resurfacing for glazing removal and both-sided friction surface smoothing and out-of-round/bell condition fixing. You start with the brake drum removal then proceed to take off the parking brake lever clip along with both brake shoe retaining clips and the two pins. The procedure requires removal of upper return spring followed by the self-adjuster assembly then lower return spring before extracting parking brake actuator lever and rear brake shoes. Silicone grease needs application to the brake shoe contact points on the backing plate before removing the self-adjuster spring and lever and pivot pin. The final stage of installation involves performing the reverse steps of removal followed by proper adjustment of the rear brake shoes.