FordParts
My Garage
My Account
Cart
OEM 2006 Ford Escape Brake Shoe
Brake Shoe Set- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Shoes found
2006 Ford Escape Parking Brake, Rear Part Number: 5L8Z-2A753-AA
$62.66 MSRP: $85.27You Save: $22.61 (27%)Product Specifications- Other Name: Shoe And Lining Assembly; Parking Brake Shoe, Rear; Brake Shoes; Parking Brake Shoes; Shoes; Parking Brake Shoe
- Position: Rear
- Base No.: 2648
- Item Weight: 3.30 Pounds
- Item Dimensions: 4.5 x 3.1 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-2A753-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Escape Brake Shoes, Rear Part Number: LU2Z-2V200-K
$44.51 MSRP: $66.65You Save: $22.14 (34%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Pad - Brake; Drum Brake Shoe, Rear; Parking Brake Shoe; Rear Shoes
- Position: Rear
- Replaces: 1U2Z-2V200-RBRM, 6L8Z-2200-A, BR-11441-A, YL8Z-2200-AB, BRF-1421
- Condition: New
- Fitment Type: Direct Replacement
- SKU: LU2Z-2V200-K
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Escape Brake Shoe
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Escape Brake Shoe available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Escape Brake Shoe as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Escape Brake Shoe Parts Q&A
- Q: How to Service rear brake shoes and ensuring proper installation on 2006 Ford Escape?A: New rear brake shoes and linings installations require brake drum resurfacing for glazing removal and establishment of uniform friction across both sides even with out-of-round and bell adjustments. Start the procedure by taking off the brake drum before unfastening the parking brake lever clip together with the two brake shoe retaining clips and the two pins. The service of brake shoes begins with removal of upper return spring followed by self-adjuster assembly then lower return spring and parking brake actuator lever before removing the rear brake shoes. Silicone grease must be applied to brake shoe contact points on the backing plate before completely extracting the self-adjuster spring and lever together with the pivot pin. After reversing the removal steps you should finish the installation by readjusting the rear brake shoes.