What Precautions Should Be Taken When Servicing Coil Springs and What Are the Steps Involved on 2005 Ford Escape?

Safety goggles must be worn to use a spring compressor during coil spring servicing since they protect against personal injury. The nut always requires manual installation instead of an impact wrench. The first step involves placing the strut along with its spring into a suitable spring compressor tool which allows compressing the coil spring to eliminate tension from the strut assembly. Before rebuilding follow the instructions to tighten the strut piston rod-to-bushing nut at 103 Nm (76 ft. lbs.) before reinstalling it. Proceed to disassemble the strut before moving on to remove the lower coil spring insulator then the coil spring followed by the upper coil spring insulator. The bearing plate attachment during reassembly should start with pointing the arrow toward the vehicle's outboard side first. The bearing and both the upper bushing as well as the dust boot should be removed before the bumper is taken off. Perform the reverse procedures to finish the assembly process.

OEM 2005 Ford Escape Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Coil Springs found

View related parts
2005 Ford Escape Spring, Rear Part Number: 5M6Z-5560-AA
$54.71 MSRP: $75.68
You Save: $20.97 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring - Rear; Coil Spring, Rear; Coil Springs
- Position: Rear
- Base No.: 5560
- Item Weight: 8.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5M6Z-5560-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Hybrid | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV)
View related parts
2005 Ford Escape Coil Spring, Front Part Number: 5M6Z-5310-AB
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs; Spring
- Position: Front
- Replaces: 5M6Z-5310-AA
- Base No.: 5310
- Item Weight: 9.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5M6Z-5310-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Ford Escape Coil Spring, Rear Part Number: 5L8Z-5560-EA
Product Specifications
- Other Name: Spring - Rear; Coil Spring, Rear; Coil Springs
- Manufacturer Note: Coil Springs
- Position: Rear
- Base No.: 5560
- Item Weight: 8.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5L8Z-5560-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Ford Escape Spring, Rear Part Number: 5L8Z-5560-CA
Product Specifications
- Other Name: Spring - Rear; Coil Spring, Rear; Coil Springs
- Position: Rear
- Base No.: 5560
- Item Weight: 8.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5L8Z-5560-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Ford Escape Coil Spring, Rear Part Number: 5L8Z-5560-AA
Product Specifications
- Other Name: Spring - Rear; Coil Spring, Rear; Coil Springs
- Position: Rear
- Base No.: 5560
- Item Weight: 8.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5L8Z-5560-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Ford Escape Coil Spring, Front Part Number: 5L8Z-5310-A
Product Specifications
- Other Name: Spring - Front; Coil Spring, Front; Coil Springs; Spring
- Position: Front
- Base No.: 5310
- Item Weight: 7.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5L8Z-5310-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2005 Ford Escape Coil Springs

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Escape Coil Springs available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Escape Coil Springs as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Escape Coil Springs Parts Q&A

Q: What Precautions Should Be Taken When Servicing Coil Springs and What Are the Steps Involved on 2005 Ford Escape?
A: Safety goggles must be worn to use a spring compressor during coil spring servicing since they protect against personal injury. The nut always requires manual installation instead of an impact wrench. The first step involves placing the strut along with its spring into a suitable spring compressor tool which allows compressing the coil spring to eliminate tension from the strut assembly. Before rebuilding follow the instructions to tighten the strut piston rod-to-bushing nut at 103 Nm (76 ft. lbs.) before reinstalling it. Proceed to disassemble the strut before moving on to remove the lower coil spring insulator then the coil spring followed by the upper coil spring insulator. The bearing plate attachment during reassembly should start with pointing the arrow toward the vehicle's outboard side first. The bearing and both the upper bushing as well as the dust boot should be removed before the bumper is taken off. Perform the reverse procedures to finish the assembly process.