FordParts
My Garage
My Account
Cart
OEM 2005 Ford Escape Oil Pressure Switch
Oil Pressure Sender Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Oil Pressure Switches found
2005 Ford Escape Pressure Switch, Green Part Number: BE8Z-9278-A
$2.27 MSRP: $3.60You Save: $1.33 (37%)Ships in 1 Business DayProduct Specifications- Other Name: Switch Assembly - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Sending Unit; Switch; Oil Pressure Switch
- Replaces: 1S7Z-9278-AA, SW-6682
- Base No.: 9278
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.1 x 4.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BE8Z-9278-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Escape Pressure Switch Part Number: 6U5Z-9278-M
$102.89 MSRP: $172.73You Save: $69.84 (41%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Switch Assembly - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Gauge Sw; Oil Pressure Switch; Oil Pressure Sending Unit; Oil Gauge Sending Unit
- Manufacturer Note: 3/8" NPTF
- Replaces: 1U5Z-9278-BA, 6U5Z-9278-L, SW-6362
- Base No.: 9278
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.2 x 4.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6U5Z-9278-M
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Escape Oil Pressure Switch
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Escape Oil Pressure Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Escape Oil Pressure Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford Escape Oil Pressure Switch Parts Q&A
- Q: How to Service the Oil Pressure Switch on 2005 Ford Escape?A: Service of the oil pressure switch starts with positioning the vehicle on a hoist and setting it to neutral. The right-hand splash shield requires five bolts to be removed before installation when tightening them to 9 Nm (80 inch lbs.) during reinstallation. First detach the electrical connector from the oil pressure switch before removing the switch from its location while tightening the installation to 15 Nm (11 ft. lbs.). Completely reverse the uninstallation steps before applying Teflon-containing pipe sealant to the oil pressure switch threads.