How to service and repair the accelerator cable on 2005 Ford Excursion?

To fix the accelerator cable, you need to hold the pedal, unclip the cable between the pedal and shaft and close the air cleaner outlet. Take the splash shield off, unplug the pushpin and draw the cable through. Disassemble it, connections to throttle body and then remove it. Install new cable by re-arranging these processes.

OEM 2005 Ford Excursion Accelerator Cable

Choke Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Accelerator Cable found

View related parts
2005 Ford Excursion Throttle Cable Part Number: YC3Z-9A758-AB
$244.71 MSRP: $458.72
You Save: $214.01 (47%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Throttle Control
- Replaces: F81Z-9A758-AA
- Base No.: 9A758
- Item Weight: 2.10 Pounds
- Item Dimensions: 30.4 x 11.6 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YC3Z-9A758-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

2005 Ford Excursion Accelerator Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Excursion Accelerator Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Excursion Accelerator Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Excursion Accelerator Cable Parts Q&A

Q: How to service and repair the accelerator cable on 2005 Ford Excursion?
A: To fix the accelerator cable, you need to hold the pedal, unclip the cable between the pedal and shaft and close the air cleaner outlet. Take the splash shield off, unplug the pushpin and draw the cable through. Disassemble it, connections to throttle body and then remove it. Install new cable by re-arranging these processes.