FordParts
My Garage
My Account
Cart
OEM 2005 Ford Excursion Shock Absorber
Suspension Shock Absorber- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Shock Absorbers found
2005 Ford Excursion Shock Absorber, Front Part Number: AU2Z-18V124-AQ
Product Specifications- Other Name: Shock Absorber Assembly - Front; Suspension Shock Absorber, Front; Suspension Shock Absorber; Shock
- Position: Front
- Replaces: 3U2Z-18124-JAA, ASH-706, ASH-394, 2C7Z-18124-DA, 3U2Z-18124-BV
- Base No.: 18124
- Item Weight: 4.30 Pounds
- Item Dimensions: 4.7 x 3.6 x 26.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AU2Z-18V124-AQ
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Excursion Shock Absorber, Rear Part Number: BU2Z-18V125-L
Product Specifications- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear; Suspension Shock Absorber; Shock
- Position: Rear
- Replaces: ASH-120, YC3Z-18125-AA, 2C7Z-18125-AA
- Base No.: 18125
- Item Weight: 7.20 Pounds
- Item Dimensions: 4.7 x 3.6 x 27.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V125-L
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Excursion Shock Absorber, Front Part Number: AU2Z-18V124-BK
Product Specifications- Other Name: Shock Absorber Assembly - Front; Suspension Shock Absorber, Front; Suspension Shock Absorber; Shock
- Position: Front
- Replaces: 3U2Z-18124-CDD, ASH-723
- Base No.: 18124
- Item Weight: 6.00 Pounds
- Item Dimensions: 28.1 x 3.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AU2Z-18V124-BK
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Excursion Shock Absorber, Rear Part Number: BU2Z-18V125-M
Product Specifications- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear; Suspension Shock Absorber; Shock
- Position: Rear
- Replaces: 2C7Z-18125-CA, ASH-121, YC3Z-18125-CA
- Base No.: 18125
- Item Weight: 6.10 Pounds
- Item Dimensions: 27.8 x 3.5 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BU2Z-18V125-M
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Excursion Shock Absorber
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Excursion Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Excursion Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford Excursion Shock Absorber Parts Q&A
- Q: How to service and repair the rear shock absorber on 2005 Ford Excursion?A: Service and repair of the rear shock absorber should be done on a vehicle with neutral transmission that rests on a hoist. Secure the rear axle using a proper jack positioning. Start by removing the lower retaining nut along with bolt from the shock absorber then continue by taking out the two mounting bolts which attach the shock absorber to the frame. The shock absorber installation requires following the removal steps in reverse order and using fresh fasteners that match the original part number or an equivalent for enhanced operation. The correct retention of vital suspension components depends on using the torque values specified for assembly according to design. It is essential to note that the low-pressure gas shock absorbers contain nitrogen gas so never try to open or puncture them or apply heat to their area.