How to Service and Repair the Water Pump on Gasoline Engines on 2005 Ford Excursion?

The process to repair the coolant pump for gasoline engines starts with draining the cooling system content. Service begins with disposing of the coolant before removing the engine cooling fan and clutch. Next comes the drive belt followed by the coolant pump pulley unfolding requires bolt removal. Detach the coolant pump from the cylinder block before you clean the mating surfaces then inspect them. Install the new O-ring seal by applying engine coolant lubrication before setting it on the pump. Fasten the coolant pump inside the engine block by using bolts for installation. Reinstall the accessory drive belt as well as the fan clutch after inserting the pulley onto the coolant pump and tightening its bolts. To complete the procedure fill the cooling system with Motorcraft Premium Gold Engine Coolant while avoiding the mixture of different coolant types.

OEM 2005 Ford Excursion Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Water Pumps found

View related parts
2005 Ford Excursion Water Pump
Part Number: 3L3Z-8501-CA
$51.84 MSRP: $83.64
You Save: $31.80 (39%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Manufacturer Note: With M30 Hub
- Replaced by: 5L3Z-8501-AC
- Replaces: 5R3Z-8501-A, 5L2Z-8501-A, 1L2Z-8501-BB, F7UZ-8501-CA, F8AZ-8501-AA, PW-470, PW-387, YW7Z-8501-AA, AR3Z-8501-A, F4AZ-8501-A, AL3Z-8501-B, PW-499, YR3Z-8501-AB, YC2Z-8501-BA, PW-466, XC2Z-8501-BA
- Base No.: 8501
- Item Weight: 5.60 Pounds
- Item Dimensions: 6.6 x 5.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L3Z-8501-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 5.4 L GAS
View related parts
2005 Ford Excursion Water Pump
Part Number: 4C3Z-8501-B
$131.76 MSRP: $221.82
You Save: $90.06 (41%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaced by: 4C3Z-8501-D
- Replaces: PW-461, YC3Z-8501-AB, 7L3Z-8501-A, YC3Z-8501-AA
- Base No.: 8501
- Item Weight: 5.30 Pounds
- Item Dimensions: 6.8 x 5.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C3Z-8501-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS
View related parts
2005 Ford Excursion Water Pump
Part Number: 3C3Z-8501-B
$92.40 MSRP: $146.73
You Save: $54.33 (38%)
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaces: 3C3Z-8501-A, PW-480
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3C3Z-8501-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2005 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 8 Cyl 6.0 L DIESEL

2005 Ford Excursion Water Pump

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Excursion Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Excursion Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Excursion Water Pump Parts Questions & Experts Answers

Q: How to Service and Repair the Water Pump on Gasoline Engines on 2005 Ford Excursion?
A: The process to repair the coolant pump for gasoline engines starts with draining the cooling system content. Service begins with disposing of the coolant before removing the engine cooling fan and clutch. Next comes the drive belt followed by the coolant pump pulley unfolding requires bolt removal. Detach the coolant pump from the cylinder block before you clean the mating surfaces then inspect them. Install the new O-ring seal by applying engine coolant lubrication before setting it on the pump. Fasten the coolant pump inside the engine block by using bolts for installation. Reinstall the accessory drive belt as well as the fan clutch after inserting the pulley onto the coolant pump and tightening its bolts. To complete the procedure fill the cooling system with Motorcraft Premium Gold Engine Coolant while avoiding the mixture of different coolant types.